UNSOLVED

b-tiger

updated

21 years ago

BT

b-tiger

16 Posts

0

8992

December 27th, 2005 17:00

compelling computer problem

Here is my situation:

I have a dell dimension 8200 (i think) with an Intel Pentium 4 processor 1.80 GHz. My 40 Gig hard drive failed recently. I purchased an 80 Gig hard drive and installed it - both were Seagate hard drives. I've tried to load Windows XP with my reinstallation cd that came with the computer and get a message that windows requires an 80486 or later processor. This same computer with the smaller hard drive operated with windows xp. Any suggestions as to how to handle this problem?
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    174

    0

    Posted December 27th, 2005 18:00

    Check the system setup to make sure the CPU isn't locked into "compatibility" mode.
  • b-tiger

    16 Posts

    174

    0

    Posted December 30th, 2005 12:00

    The system is set into normal mode.  Any suggestions about what to do next?
  • b-tiger

    16 Posts

    174

    0

    Posted January 3rd, 2006 16:00

    If you have any suggestions please share them.  It seems the problem rests with my processor.  What are some possible causes of a pentium 4 processor 1.80 GHz running at a 100 MHz Bus speed?  Again if you have any suggestions share them, I'm at my wits end.

     

    b-tiger

  • GreyMack

    2 Intern

    •

    2190 Posts

    174

    0

    Posted January 3rd, 2006 16:00

    It may also be helpful to provide the following information from the BIOS setup screen, as posted on another thread and copied here.

    "Here is the CPU information from the set up screen:
    CPU speed:  Normal
    Bus speed:   100 MHZ
    Processor 0  ID F12
    Clock Speed 1.80 GHz
    Cache Size 256 KB
     

    GM