UNSOLVED
233
0
Posted October 21st, 2004 18:00
thanks for your help guys! I appreciate it!!!233
0
Posted October 21st, 2004 18:00
A standard powersupply will fit the 2400 and the 4600 without any mods or you can get a Dell replacement here:
233
0
Posted October 22nd, 2004 08:00
Just to be sure ,you should found out if you have Dell's power supply and motherboard or the standard ATX ,here are 3 ways to find out. If it says you have a intel motherboard then you can use a standard atx psu.If it says no intel board detected then you have a Dell board and psu ,if you put in a atx pcu with Dells board it will fry.http://support.intel.com/support/motherboards/desktop/sb/CS-009009.htm-
Search By AA Numbers
-----------------------------------------------------------------------------------------------------------------------------------http://www.intel.com/support/motherboards/desktop/d845gvfn/sb/CS-012681.htm -
the Intel® Board ID Tool ----------------------------------------------------------------------------------------------------------------------------------http://support.intel.com/support/motherboards/desktop/sb/CS-010687.htm -
the BIOS identification string near the top left corner of the screen. If your computer displays the
Intel® logo
233
0
Posted May 19th, 2008 02:00
I know I am a bit late to this thread, but I have a Foxconn mobo and I replaced the PSU with a Antec 650 watt PS and I have had no issues what so ever. And so far (almost 4 years later) I haven't had any issues, and I have this system loaded. I upped the CPU to 3.33Ghz 2 gigs of PC 2700 3 HD's (1 300Gig, 1 500 and I TB) DVD burner X-FI card nVidia FX 5200 with 256 MB ram HP DL DVD Burner and a Avert TV Tuner and the computer runs XP SP3, Vista SP1 and Ubuntu 8.04 LTS
rdaxx
117 Posts
233
0
Posted October 21st, 2004 17:00
http://www.pcpowerandcooling.com/products/power_supplies/selector/dell.htm