UNSOLVED

abn505

updated

22 years ago

A

abn505

3 Posts

0

14634

August 27th, 2004 00:00

Dimension 4100 3 Beeps code

Hi,

I have a dimension 4100 my daughter uses. It won't boot up due to 3 beep and 2 amber and two green lights that signify a memory problem. It has two modules ( 256 mb each) I have reseated several times and tried one at a time with no luck. I called Dell and they said it could be the processor. It is hard to believe that two memory modules went bad at the same. Should I buy a new processor? Is there anything else I should do before buying one. The computor is 4 years old and never had a problem before. thanks for any help.

  • DELL-Donald K

    2 Intern

    •

    3969 Posts

    308

    0

    Posted August 27th, 2004 00:00

    YYGG  & 3 beeps is definitely a ram issue. 

    When seating the RAM, Once you disconnected power & drained the capacitors (Press & hold the power button till LED on MB goes out) It is IMPERATIVE that you never pull the locking levers up in to position.  Once you align the RAM in the slot, press down FIRMLY with both thumbs on the top of the RAM until the levers raise & lock on their own.

    Try 1 stick of RAM, then the other, see if system will boot with only 1.  If not, I'd buy 1 additional stick of RAM, before I considered replacing the MB or Processor.  To be honest, I'd replace the system before I'd by a motherboard or Processor for this one (Not cost effective)

    If reseating RAM doesn't help, you might have a local computer pro look at it.


    DELL-Donald K
    #IWork4Dell