UNSOLVED

Grlffon

updated

21 years ago

G

Grlffon

2 Posts

0

9759

August 6th, 2005 17:00

Hyper Thread Enabling

Can someone help me to enable hyper threading on my Dimension 4600?  In setup, the CPU options read:
 
CPU:  normal/compatible
Bus Speed:  533mHz
Processor 0 ID:  F29
     Clock Speed:  2.66GHz
     Cache Size:  512 KB
 
I read that there is supposed to be options for BIOS in there so that I can enable hyper threading, but I cannot find BIOS any where in set up. 
 
Can anyone help me please?
 
and yes it is a p4.
  • 442

    0

    Posted August 6th, 2005 21:00

    Go into setup click on CPU another window will come up with CPU options, if your CPU supports hyper threading. from here you will be able to enable it. Most Intel CPU that support hyper threading run at 800 FSB. If you cannot enable hyper theading check the CPU specifiacations at Intel. I just installed a new 3.4 P4 at 800 FSB on my 4600 and was able to enable hyper threading, but it only runs at 2.8 with an 800 FSB.
  • becho

    88 Posts

    442

    0

    Posted August 7th, 2005 01:00

    w/ the specs you gave i don't think you have hyperthreading on that cpu.
     
  • DJ_ShiSaS

    182 Posts

    442

    0

    Posted August 7th, 2005 15:00

    i'm afraid that this CPU doesn't support HT... on only CPU's with more than 2.8ghz can be enabled
  • Grlffon

    2 Posts

    442

    0

    Posted August 11th, 2005 19:00

    Thanks to everyone who replied.  I'm guessing my PC is not capable of hyper threading.  Thanks for all the help!

     

    Griffon

  • 442

    0

    Posted September 14th, 2005 22:00

    Hi Dude if you ever decide to upgrade your CPU be sure to only get a Northwood based P4 CPU which have 512 K of L2 cashe. The  Dell 4600 will not fully use Prescott based CPU's which have 1 M of L2 cashe. Just recently saved up the money and purchased on Ebay a Northwood based 3.2 CPU @ 800 FSB with 512 of L2 cashe. Installed and fired up with no problems. Oh and for Hyperthreading the CPU must have 800 FSB have a nice week.