UNSOLVED

whitmanj4

updated

24 years ago

W

whitmanj4

1 Rookie

1 Message

0

101739

May 18th, 2002 21:00

I/O Card Parity Interrupt

Upon turning on the machine this error often pops up and locks up the whole thing:

I/O card parity interrupt at F000:09A7
Type (S)hut off NMI, (R)eboot, other keys to continue


I/O card parity interrupt at F000:2405
Type (S)hut off NMI, (R)eboot, other keys to continue





Message Edited on 05/18/02 05:33PM by whitmanj4
  • whole9yard

    2 Intern

    279 Posts

    10628

    0

    Posted May 18th, 2002 21:00

    I had something like this with my computer and it was a bad network card. I don't know if you have one but you can remove it and see if this clears the problem and you can do this to your modem and sound card to see which card is the problem

  • whole9yard

    2 Intern

    279 Posts

    10628

    0

    Posted May 18th, 2002 22:00

    I did a search with microsoft and this is what I found http://support.microsoft.com/search/preview.aspx?scid=kb;en-us;Q312927

  • govenator

    2 Posts

    10628

    0

    Posted October 27th, 2003 03:00

    I know your message was posted quite some time ago, but I am having the same problem and cannot get much help from the tech support. Was a cure for this issue ever found? If so I would be very happy to hear it. Thanks.
  • 10628

    0

    Posted October 27th, 2003 06:00

    I/O card parity interrupt at XXXX Type (S)hut off NMI, (R)eboot, other keys to continue

    Explanation: An expansion card has generated an error indicating incorrect operation.

    Diagnosis: This is most probably an expansion card problem, particularly if it is associated with

    only one expansion card in a system in which others are working properly. It could also be a

    resource conflict of some sort.

    Recommendation:

        * Troubleshoot the expansion cards in the system.
    http://www.pcguide.com/ts/x/comp/mbsys/sys_ExpansionCards.htm
        * Troubleshoot the motherboard.
    http://www.pcguide.com/ts/x/comp/mbsys/gen_Failure.htm

  • NMex Ron

    5 Posts

    10628

    0

    Posted July 28th, 2006 18:00

    Had this same problem message:   "I/O parity card interrupt at F000:FEA5...".

    Lightening apparently came in through the phone line. (It also burned up two phones and a DSL modem)

    I checked out other discussions on this forum, removed the modem, and Thank God - it is working again.

    Hope this message may help someone else out there

    Thanks for your help.

    Ron