
UNSOLVED
M
mattmirfield
3 Posts
0
8061
November 26th, 2000 09:00
Memory (mis)usage
I'm not sure, but I think that I have problem with the memory on my PC
from my system resources I get this readout:
Total Physical Memory 255.50 MB
Available Physical Memory 67.91 MB
And when I look at the memory subsection there seems to be 6 cases of my graphics card "32mb Nvidia" (See below) .
Is this eating away at the memory?
Resource Device Status
0xFFFC0000-0xFFFFFFFF Motherboard resources OK
0x0000-0x9FFFF System board extension for PnP BIOS OK
0xE4000-0xFFFFF System board extension for PnP BIOS OK
0x100000-0xFFFFFFF System board extension for PnP BIOS OK
0xFFF80000-0xFFFBFFFF System board extension for PnP BIOS OK
0xF8000000-0xFBFFFFFF Intel 82443BX Pentium(r) II Processor to PCI bridge (with GART support) OK
0x12000000-0x130FFFFF Intel 82443BX Pentium(r) II Processor to AGP controller OK
0x12000000-0x130FFFFF 32MB Diamond Viper V770D Ultra NVIDIA OK
0x10000000-0x11FFFFFF Intel 82443BX Pentium(r) II Processor to AGP controller OK
0x10000000-0x11FFFFFF 32MB Diamond Viper V770D Ultra NVIDIA OK
0xA0000-0xAFFFF 32MB Diamond Viper V770D Ultra NVIDIA OK
0xB0000-0xBFFFF 32MB Diamond Viper V770D Ultra NVIDIA OK
0xC0000-0xC8FFF 32MB Diamond Viper V770D Ultra NVIDIA OK
0x13000000-0x1300FFFF 32MB Diamond Viper V770D Ultra NVIDIA OK
0xF4000000-0xF400FFFF MDP3900 PCI Modem Enumerator OK
0xE0000-0xE3FFF Motherboard resources OK
0xC9000-0xCBFFF Motherboard resources OK
from my system resources I get this readout:
Total Physical Memory 255.50 MB
Available Physical Memory 67.91 MB
And when I look at the memory subsection there seems to be 6 cases of my graphics card "32mb Nvidia" (See below) .
Is this eating away at the memory?
Resource Device Status
0xFFFC0000-0xFFFFFFFF Motherboard resources OK
0x0000-0x9FFFF System board extension for PnP BIOS OK
0xE4000-0xFFFFF System board extension for PnP BIOS OK
0x100000-0xFFFFFFF System board extension for PnP BIOS OK
0xFFF80000-0xFFFBFFFF System board extension for PnP BIOS OK
0xF8000000-0xFBFFFFFF Intel 82443BX Pentium(r) II Processor to PCI bridge (with GART support) OK
0x12000000-0x130FFFFF Intel 82443BX Pentium(r) II Processor to AGP controller OK
0x12000000-0x130FFFFF 32MB Diamond Viper V770D Ultra NVIDIA OK
0x10000000-0x11FFFFFF Intel 82443BX Pentium(r) II Processor to AGP controller OK
0x10000000-0x11FFFFFF 32MB Diamond Viper V770D Ultra NVIDIA OK
0xA0000-0xAFFFF 32MB Diamond Viper V770D Ultra NVIDIA OK
0xB0000-0xBFFFF 32MB Diamond Viper V770D Ultra NVIDIA OK
0xC0000-0xC8FFF 32MB Diamond Viper V770D Ultra NVIDIA OK
0x13000000-0x1300FFFF 32MB Diamond Viper V770D Ultra NVIDIA OK
0xF4000000-0xF400FFFF MDP3900 PCI Modem Enumerator OK
0xE0000-0xE3FFF Motherboard resources OK
0xC9000-0xCBFFF Motherboard resources OK
Responses (4)
Solutions (0)
mattmirfield
3 Posts
250
0
Posted November 26th, 2000 19:00
Yes, I am having problems. It is running like a dog.
I checked the usage as soon as I swtiched on. So therefore how can the PC be using just under 190mb of memory with nothing being used bar windows and norton?
Jim Hardin
2 Intern
•
2053 Posts
250
0
Posted November 27th, 2000 01:00
As I explained, Windows will use everything it can get, then return it as needed...
Turn off Norton, too!
After boot do a Ctrl-Alt-Del and see what is there.
Denny Denham has some excellant tips on fluff reduction. Follow his link to his site.mattmirfield
3 Posts
250
0
Posted November 27th, 2000 19:00
Right, turned off Norton.
These apps were open....
Explorer
winmgmt
Realplay
psconsv
elogerr
directCD
flshstat
Tsystray
Osa
msmgs
systray
armon32a
without norton, the free memory is 90mb out of 256
if you say this is normal then fine!! (why would there be 6 references to my video card in the memory section though?)
Cheers again!

Jim Hardin
2 Intern
•
2053 Posts
250
0
Posted November 26th, 2000 10:00
Windows memory allocation is dynamic, and it does quite well without tampering. It basiclly keeps all it can for itself, but changes as programs make requirements.
If you are not having any problems, leave it alone and stop looking at it...
If you are having problems, post the details and we will be glad to help you.