Solved!
Go to Solutionig neap
Shesagordie is the expert on powersupplies you mentioned in your other treads that I answered that you had a min tower. So what she wrote is correct there is only small opening in the back just big enough for the power cord.
What are you wanting to do with the system that you want to replace the powersupply?
shesagordie
12 Elder
•
46017 Posts
584
0
Posted April 7th, 2009 15:00
no this is my computer
http://web.uvic.ca/~impit/tech/images/gx280.jpg
ig neap
Your image is of an GX 280 Small Mini Tower, same as referenced too, in my post.
See HERE
Bev.
shesagordie
12 Elder
•
46017 Posts
584
0
Posted April 7th, 2009 15:00
ig neap
Sorry, cannot say, there is no information about the wiring harness, provided on Amazon's site.
See HERE,
If you use a power supply with the on/off switch in an Optiplex GX280 Small Mini Tower, you would need to modify the back panel, by cutting a hole for it.
Bev.
RobinBredin
6 Operator
•
3717 Posts
584
0
Posted April 7th, 2009 15:00
Hi ig neap, Your manual is HERE, and it says you have an 305w PSU and the PSU from Amazon is an 300w.
shesagordie
12 Elder
•
46017 Posts
1351
1
Posted April 7th, 2009 16:00
ig neap
As it's a Small Mini Tower, then the Dell power supply should be either a 250w, or a 305w.
Try opening the case and check the wattage of the installed unit. :emotion-55:
Bev.