
UNSOLVED
Closed
D600 USB Problems
The D600 can't successfully identify "power hungry" devices such as external drives (e.g. laptop variety).
I was told by a coleague that I need a USB cable that taps both D600 USBs to solve the problem...Is this so?.
Is there a firmware upgrade to correct this problem?
I was told by a coleague that I need a USB cable that taps both D600 USBs to solve the problem...Is this so?.
Is there a firmware upgrade to correct this problem?
Responses (4)
Solutions (0)
The D600 usb problems are related more to the replicator than anything else. Dell refuses to admit that they bought sub-standard hardware. Notice on the d610 that they have two usb ports on the side of the laptop, whereas the d600 had none. This made it problematic when the replicator usb ports kept dying. They also came out with a special update which tried to answer the problems with the usb...but this didn't work either.this was called nssv16.exe, and it is about 44 meg in size. What have we done to fix this problem? As a last resort, you can get a pcmcia usb card and plug the self powered hub into that for the d600. the d610 has ports on the side of the laptop, so no pcmcia card is needed. What have we had problems with?
Palm devices, dell axims, blackberry devices...it runs the gamit. I have contacted dell, but they think if they ignore me i'll just go away. Maybe we should buy a thinkpad instead...they can ignore that as well. I have a feeling that this fix...to re-design the replicator with some new features (like usable usb ports) or replacing the d600 with d610's for their customers would be way too expensive. So for now, they get to look at all of us using d600's with the replicators post message after message and get no real solution as some kind of afternoon fun with the co-workers. I've always liked dell...until they had to step up to the plate...now they're just like any other vendor...only helpful if it doesn't cost them anything. Gateway had this problem in the 90's...did them real good too.
- Completely agree - I have a D600, all the classic symptoms, multiple OS on the same machine, flaky mouse operation, Dell says the USB puts out 250mW, but a camera that only draws 160 won't run.
(same driver direct in the undocked notebook runs fine).
I have the 90W power supply delivered with the APR.
BIOS is A015, downloaded everything Dell had to offer, no luck.
Went through the service gauntlet with Dell, I think they closed the case.
I also tried an external hub, with external power, and guess what - same errors, so in my particular case, I f the APR is not just a copper USB extender, but is somehow an "active" component, I suspect Dell is relying on some windoze driver to make it play correctly.
Thinkpad ? doesn't sound bad...

ejn63
11 Legend
•
87469 Posts
•
321256 Points
313
0
Posted April 17th, 2005 14:00