
Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
UNSOLVED
Closed
Dell 5150 received without Hyperthreading
Got my Dell 5150 lap from dell outlet.(it was advertized 3.06GHz P4 with HT)
-The P4 label does not have HT.
- Per a thread here, I checked the BIOS set by hitting F2 and did not see the "enable hyperthreading" option.
DID I Receive a non HT laptop?
Thanks..
Responses (10)
Solutions (0)
mattcowger
2582 Posts
368
0
Posted November 8th, 2004 23:00
Use the Intel CPU ID utility to check for sure:
ftp://aiedownload.intel.com/df-support/3084/eng/fidenu31.msiebizli,
each intel cpu model has s-Spec number - your i5150 will have either SL726 nonHT or SL77P HT P4mobile cpu (3.06ghz)
does your dell invoice state "with hyperthreading cpu" or "with hyperthreading technology"?
all early production i5150's were nonHT, with later optional upgrade to 3.06/3.20 HT processors
mattcowger
2582 Posts
368
0
Posted November 9th, 2004 00:00
What is the full info listed under CPUID? Stepping, model, etc?Thanks..
CPU type 0
Family : F
Model: 2
Stepping: 9
Revision: 1A
Processor details:
Level 2 Cache: 512KB
level 1 data cache : 8KB
level 1 trace cache: 12Kops
Packaging: FCPGA
Processor features:
intel mmx: yes
netburst: yes
streaming smid ext: yes
extention2 : yes
extension 3: no
Hey ebizli!
I read the original post, and i downloaded the intel utility, and ran it. On the initial window, or page, where the Intel Pentium logo is. Look below where it has some scrollable text. It should indicate there whether or not you CPU has HT... as i said, i checked mine and right at the very top of the scrollable text information it says:
"This Intel(R) processor supports Hyper-Threading Technology.
See www.intel.com/info/hyperthreading for more information."I assume if your's does not say this - then to answer you very first question: Yes you recieved a non-HT laptop, and if it was advertised as such then it seems as though you were mislead. I for one would contact someone about it as i have a very good use for HT. If it does day what i have pasted here, and in your device manager it still only shows one processor, then perahps you could post something about enabling it for the 5150. I would like to help with this one, but im not familiar with the 5150.
Also, if your BIOS does not have any option in relation to HT - then i would say that is another indicator that your system is non-HT...

ebizli
22 Posts
368
0
Posted November 8th, 2004 23:00
Thanks for the quick reply.
Ran the utility. It did not say the CPU is HT
Reported Frequency: 3.06Ghz 533 MHz
Expected Fequency: 3.06GHz 533MHz
Does it confirm the CPU is NON HT?
Thanks