
Solved!
Go to SolutionM
Manufacturer_Tester
1 Rookie
•
9 Posts
0
18190
December 28th, 2014 09:00
Upgrading processors
Hi,
I was wondering what is involved when considering upgrading a cpu.
If there is a E6400 that has a 2.4Ghz processor with 2GB DDR2 667Mhz memory, can i upgrade up to a T9600 2.8Ghz cpu without having to upgrade the memory? If the motherboard supports the higher cpu ( http://en.community.dell.com/support-forums/laptop/f/3518/t/19367066 ) how is one to address the memory situation if there is one.
My reason for this inquiry is to establish if it is worth my time to purchase a cheap e6400 and upgrade it with a T9600 2.8Ghz cpu for my current needs.
:emotion-59:
Responses (6)
Solutions (0)
Manufacturer_Tester
1 Rookie
•
9 Posts
1158
0
Posted December 28th, 2014 12:00
Interesting.
I have a T7200 2.0Ghz cpu in a D630 with 3GB of DDR2 800Mhz ram memory which I have been using for weeks with no problems. It says on the memory modules 800Mhz, and I noticed that the old ones said 667Mhz. Is this a typo of some sort between manufacturers? As well the model number of the chips were different. The 667Mhz read as PC2 5300S and I believe the ones that say 800Mhz on the manufacturer's sticker is listed on the manufacturer's sticker on the memory modules as PC2 6400S.
My point is, are you sure that i can not use 667Mhz memory with that T9600 2.8G cpu chip? The original memory I took out shows that they are 667Mhz, but the ones I recently put in it say 800Mhz, so please excuse me if I get confused. It came from a box of spare sparts and the computer functions as well as when it had the PC 5300 memory.The RAM needs to be one step behind the CPU bus for these systems - if you install a CPU that runs an 800 MHz bus, 667 RAM is fine. Likewise for a 1066 MHz CPU such as the one you want to install - the RAM needs to be one step lower (800 MHz). You can try 667 with a 1066 CPU but I suspect you'll get a memory error when you try to boot the system.
Manufacturer_Tester
1 Rookie
•
9 Posts
1158
0
Posted December 28th, 2014 13:00
Is that the worst that could happen?
I couldn't fry these memory modules because they are the wrong ones to use with the cpu?
Manufacturer_Tester
1 Rookie
•
9 Posts
1158
0
Posted December 31st, 2014 06:00
Instead of using DDR2 800mhz memory for a Core Duo 2.8Ghz cpu, can I use a DDR3 1066 instead?
Are they compatible?
What model DELL laptops can handle DDR3 memory? I can see that DDR3 memory is half the price of DDR2.

ejn63
11 Legend
•
87469 Posts
•
321256 Points
1158
0
Posted December 28th, 2014 09:00
The T9600 needs DDR2-800 RAM -- you'd need to replace the RAM if your current CPU works with 667 (800 MHz bus uses 667 RAM; 1066 needs 800).