2007FP, stand stuck?

Question

I was wiping some dust/smudges off of the monitor with a towel, and in the process, I put a hand on top of the monitor which inadvertently pushed it down. The height is obviously adjustable, so I didn't worry about it and finished wiping the stuff off. However, when I went to lift the monitor back to where I had it set, it wouldn't go up. Is there some button that I'm not seeing that lets me adjust the stand, or is there a problem?I've located the lock down/release button, but it either doesn't work or requires strength to push down. Anyone have ideas on how to get the monitor up/get the button unstuck?

M0tto · Accepted Answer

There is a trick to unlocking it:First, push the screen straight down with one hand (it will move down a few millimeters or so from its current position).While holding the screen down, push the rectangular button that is on the back of the stand. You will notice that the button pushes all the way in now that you are holding the screen at its lowest position.Then, while holding that button down with one hand, raise the screen with the other. You should now be able to raise and lower your monitor screen freely.The trick is to push the monitor screen all the way to the bottom (until it goes no further) before pushing the button.Hope this helps.

relate2 · Answer

I think if you push gently down on top of the screen before you push the button it should work for you.

Venue Pro

Dell Supportressourcen

Neueste Lösungen

PCI-Status: Warnung Treiberfehler

Dell-Logo 5320 2-in1 Backcover

Laufwerksgehäuse 4x 2,5

Latitude 7310 - Windows 11 installieren, ein vom computer benötigter medientreiber fehlt