UNSOLVED

Jim Gravina

updated

18 years ago

JG

Jim Gravina

1 Rookie

•

15 Posts

0

15189

August 27th, 2008 04:00

Dell 2007wfp panel type?

I was wondering how to tell what panel type this monitor has.  I know there were two flavors (S-IPS and S-PVA).  Is there a way to tell from a serial number or part number, etc?

 

Also, how is one to tell what REVISION is has.

 

Thank you,

Jim
  • gpro

    2 Intern

    •

    2024 Posts

    383

    0

    Posted August 27th, 2008 06:00

    If you have an early one, you can see the panel details in the service menu.

    To access the service menu: 

    1. Turn off the monitor

    2. Hold in the 'Menu' and ' + ' buttons at the same time while pressing the power button.
    3. After the power is on, let go of the two buttons and then press the ' - ' button.

    At the top you will see one of the following:

    LPL WSXGA LM201W01   (LG.Philips S-IPS panel)
    SAM WSXGA LTM201M1  (Samsung S-PVA panel)

     

    Otherwise, see this thread.

     

    The revision number should be on the serial number sticker on the back.

  • Jim Gravina

    1 Rookie

    •

    15 Posts

    383

    0

    Posted August 27th, 2008 12:00

    Is there a way to tell from the box itself?  I found some refurbushed ones online and I want to get two of the for a dual set up.  I want to make sure they are both the same panel type and revision.  All the places I have found this monitor, have a 25% restock fee if i was to return. 

     

    I was hopfully going to have them look for a number or something on the box to help aid in the determination or panel type and revision....

     

    any thoughts?

    Thanks for your help,

    Jim

  • gpro

    2 Intern

    •

    2024 Posts

    383

    0

    Posted August 27th, 2008 14:00

    I want to make sure they are both the same panel type and revision.

    - Good idea

     

    According to that HardForum thread you can also tell from the serial number. It's a 20 digit hyphenated alpha-numeric code. It was printed on the box of my new monitors but I don't know about refurbs.

  • Jim Gravina

    1 Rookie

    •

    15 Posts

    383

    0

    Posted August 27th, 2008 15:00

    None of these online places are giving me any information.  Im starting to think its not worth the chance of getting them if they may end up being different.  I know there had been several revisions to these...im almost assuming that these refurbs that are available now, are the returns from past consumers to get their newer revision.

     

    Is this a safe assumption?

     

    Jim

  • gpro

    2 Intern

    •

    2024 Posts

    383

    0

    Posted August 28th, 2008 00:00

    im almost assuming that these refurbs that are available now, are the returns from past consumers to get their newer revision.

     

    - not exactly, you can't exchange a monitor just to get a new revision - you have to demonstrate a defect. The main issue with these was gradient banding which was fixed in A02. Refurbs may or may not have newer firmware, but who knows what other issues you'll find. They'd want to be pretty cheap to take the gamble.