Announcement Banner
UNSOLVED

ortleeb

updated

20 years ago

O

ortleeb

575 Posts

0

19388

October 25th, 2006 00:00

Is 2007FP 8-bit or 6-bit?

My beloved 2001FP died and I'm thinking of replacing it with the 2007FP. Is the 2007FP an 8-bit or 6-bit panel?
 
Thanks,
 
Tom
  • gpro

    2 Intern

    •

    2024 Posts

    651

    0

    Posted October 25th, 2006 07:00

    2007FP has used both Samsung S-PVA and LG.Philips S-IPS panels. Both are 8 bit, but the S-IPS is better.
  • ortleeb

    575 Posts

    651

    0

    Posted October 25th, 2006 11:00

    Thanks, gpro...much appreciated.
     
    Tom
  • match000

    14 Posts

    653

    0

    Posted October 26th, 2006 17:00

    Hello,

    If I buy a 20" 2007 Today for a Small Biz Dim 9200, will I get the S-PVA or S-IPS?

    Thanks!
  • qua_sar_x

    41 Posts

    653

    0

    Posted October 26th, 2006 19:00



    @match000 wrote:
    Hello,

    If I buy a 20" 2007 Today for a Small Biz Dim 9200, will I get the S-PVA or S-IPS?

    Thanks!




    Allegedly, Dell now uses S-PVA panels in the 2007FP model. I received my 2007FP today and have no idea which panel it is since I got the new firmware (A03) which no longer shows the panel type in the service menu. There are just codes, nobody knows yet what they mean.
  • blunden2

    55 Posts

    653

    0

    Posted October 27th, 2006 00:00

    You should be able to tell what panel it is by looking in extreme angles. S-IPS panels have a very special effect in these circumstances.
  • qua_sar_x

    41 Posts

    653

    0

    Posted October 27th, 2006 07:00



    @blunden2 wrote:
    You should be able to tell what panel it is by looking in extreme angles. S-IPS panels have a very special effect in these circumstances.




    Some discoloration? I've looked at my 2000FP in extreme angles and didn't notice any changes whatsoever. So the S-PVA is supposed to have better viewing angles than the S-IPS?
  • blunden2

    55 Posts

    653

    0

    Posted October 27th, 2006 10:00

    qua_sar_x: Look at this.

    http://www.hardforum.com/showthread.php?t=1071189

    No actually S-IPS is said to have the best viewing angles for some reason. It's probably because the image doesn't get washed out, only this is added to it and it's pretty unnoticable except for dark black.

    Message Edited by blunden2 on 10-27-2006 01:11 PM

  • qua_sar_x

    41 Posts

    653

    0

    Posted October 27th, 2006 12:00



    @blunden2 wrote:
    qua_sar_x: Look at this.

    http://www.hardforum.com/showthread.php?t=1071189




    I checked the links and I have none of this IPS-discoloration. Black stays black and the picture stays sharp, it doesn't get washed out and doesn't show any discoloration regardless of the viewing angle. If I am supposed to have a S-PVA, I must say that I am very happy with it. At least I have no clue what this panel-hysteria is about.