UNSOLVED

phani6039

updated

14 years ago

P

phani6039

22 Posts

0

2733

August 29th, 2012 02:00

Help about Clean periodic Message

Hi,

Currently i am using NetWorker Management Console version 3.4.2.Build.431based on NetWorker version 7.4 SP2.Build.431 and getting these messages about clean periodic as in attachment

Any help in regarding how this needs to be done will be really great.

Thanks,

Phani

1 Attachment

  • Panwar

    79 Posts

    523

    0

    Posted August 29th, 2012 03:00

    Hi Phani,

    Agree with Shiva, Tape drives requires cleaning after certain writes. Make sure that you have cleaning tape present the tape library. If its not there, please configure the cleaning slot and Insert the cleaning tape, so that tape drive will automatically take the cleaning tape whenever it required.

    You can refer the following KB article how to configure cleaning slot in NetWorker.

    http://solutions.emc.com/EMCSolutionView.asp?id=esg92586&usertype=C

    Regards

    Panwar

  • phani6039

    22 Posts

    804

    0

    Posted August 29th, 2012 03:00

    Hi Siva,

    Thanks for replying. I am not used of using Networker yet. From the help i found out that Cleaning attribute for device is set to Yes in my library.

    Stuff from manual:

    "Tape device cleaning is an automated, self-contained operation. It is no longer part of a media-loading operation. Tape device cleaning is automatically triggered if one of these conditions exist:

    The last time the device was cleaned was a full cleaning interval ago.

    The Cleaning Required attribute for the device is set to Yes in one of the following ways:

    Manually by the user.

    Automatically by the NetWorker server, after it receives a "device needs cleaning" notification.

    When one of these conditions is met for a device, cleaning begins as soon as the device becomes available. Loaded devices are unloaded before a cleaning operation begins. Loading a cleaning cartridge (with the nsrjb -l cleaning cartridge command) to force a cleaning operation is no longer supported."

    Cant understand last sentence which contradicts to first one.

    Got couple of questions

    Do we need to load a tape and tell Networker that we have loaded cleaning tape?

    Do we have a separate tape for cleaning?

    How to find out difference between th cleaning tape and the normal tape as i am working on remote location?

    Just now saw the messages of networker and it have cleared the Clean periodic warning even though i havent inserted any cleaning tape.

    Any info will be great.

    Thanks,

    Phani

  • 804

    0

    Posted August 29th, 2012 03:00

    Hi Phani,

    The tape drive is due for routine cleaning. Please insert cleaning tape and perform the cleaning process.

    Check the tape drive users manual for device specific cleaning instructions.

    Thank you

    ShivaKiran

  • 803

    0

    Posted August 29th, 2012 04:00

    Hi Phani,

    For example, if you have 10 slots in your library, one slot you will allocate for cleaning catridge.

    A cleaning tape is kept in that slot and this slot and tape is not used for any of your backup operations.

    So when you configure the cleaning slot, you will mention that after how many runs device should be cleaned.

    If you have a device /dev/nsr0 device which is been used for 10 times and if your cleaning is configured as 10, then when the drive  /dev/nsr0 is used for the 11th time will show your a media warning as cleaning required.

    Depending upon manual or automatic, the cleaning tape is picked up and then cleaning is performed.

    Thanks

    ShivaKiran

  • Panwar

    79 Posts

    804

    0

    Posted August 29th, 2012 04:00

    Hi Phani,

    Please let us know is it Physical tape library or virtual tape library.

    Regards

    Panwar

  • 803

    0

    Posted August 30th, 2012 01:00

    Hi Phani,

    If you go to Devices Tab in NMC, Under Libraries -> Select the Library and go to its properties.

    There you can find the cleaning slot option to set. If there is no option is selected and no slot number is mentioned then you can confirm that nothing has been configured earlier

    You can use any slot as cleaning slot and you have a tape in there which will clean the device headers

    out of 10 slots, If you want to set slot 10 as your cleaning slot, then you have to mention as 10-10

    Then slot 10 will be assigned for cleaning slot and no other tape which has the data on it will get into the slot even though its free.

    For more information and steps, you can refer the link given by panwar earlier

    Hope this explanies

    Thank you

    ShivaKiran

  • phani6039

    22 Posts

    803

    0

    Posted August 30th, 2012 01:00

    Hi Shiva,

    Thanks for explaning. As this networker has already been configured before, is there a way to find out which slot it is configured for cleaning and which tape?

    Thanks,

    Phani

  • phani6039

    22 Posts

    803

    0

    Posted August 30th, 2012 01:00

    Hi Panwar,

    It is a physical tape library.

    Thanks,

    Phani

  • phani6039

    22 Posts

    803

    0

    Posted August 30th, 2012 05:00

    Hi Shiva,

    Thanks a lot and i had look at the library properties and auto clean option is not checked, no slots mentioned for cleaning. That make me think no cleaning option slot has been configured before.

    I am using 23 slot juke box lto-4 drive. Do we have any identication for a cleaning tape to be distinguished from other tapes?

    Thanks,

    Phani

  • 437

    0

    Posted August 31st, 2012 00:00

    Hi Phani,

    Cleaning tape has a different bar code to that of other tapes.

    You can check with the library vendor on this who can suggest you in this regard.

    Thank you

    ShivaKiran