Solved!
Go to SolutionNMC shows nothing, except clients
Hi All,
I have two NetWorker servers v9.2.1 running under Windows. Both have the NMC installed.
I connect from my local workstation to one of the servers NMC. Both NetWorker servers are configured in there. The problem is that I can only administer the NetWorker server where the NMC runs on. The remote server can be accessed but all the resources are empty. Only the clients are shown with a red dot:
At first I was not able to connect to the remote server at all. I did get the message "failed to validate security token". Then I issued the command "nsrauthtrust -U -P 9090". Since then I get the above behavior.
There is no problem the administer the remote NetWorker server when I locally connect to it and use the NMC. But I want to use my local workstation to access the two NetWorker servers.
Can someone help?
Cheers
beacon
1060
0
Posted July 6th, 2018 01:00
beacon ,
Do you have a firewall between your work station and the NMC server ? IF you do, you might want to look at setting up rules to access the NMC for ports 9000, 9001 and 5432.
1060
0
Posted July 9th, 2018 04:00
Hi crazyrov,
there is no firewall in my environment.
I tried to increase the java heap size which did not solve the problem unfortunately.
1060
0
Posted July 9th, 2018 08:00
Hi Francisco,
yes, you are right, I did use that too.
The nsraddadmin was not issued by me. Maybe that is the failure here...
netofm
9 Posts
1060
1
Posted July 6th, 2018 04:00
Beacon,
Could be a typo but I do use the "nsrauthtrust -H -P 9090" command, not "-U".
After that, the "nsraddadmin -H
Regards,
Francisco