UNSOLVED
I can't remove VLAN settings on a particular port
I'm trying to change port settings via the CLI on a 5548P. I have this:
!
interface gigabitethernet1/0/47
channel-group 1 mode on
no switchport
switchport general allowed vlan add 200 tagged
switchport general allowed vlan add 2 untagged
!
There were other settings in there but I got rid of them by running "no" and then the necessary commands. I can't seem to get rid of the LAST TWO lines there (the "switchport general allowed vlan add # tagged/untagged")
I've tried "no switchport general allowed vlan" and "no switchport" and a few other things, but nothing gets rid of those two lines. My only option now is to just remove the VLANs and then start over by re-adding them.
So what commands do I use?
I'm still dealing with this.. the stuff on page 499 didn't really help. After fiddling with it, my port config now says this:
interface gigabitethernet1/0/24
no switchport
switchport access vlan none
So I guess my question is, will these current settings be over-written if I add the changes I want, such as vlan access? My original goal was to completely remove all settings, but it looks like the switch config file keeps one or the other... it won't just let 1/0/24 be blank..
DELL-Josh Cr
Community Manager
•
9700 Posts
•
43747 Points
17793
0
Posted October 12th, 2017 16:00
Hi,
Try making it an access port and then use no switchport access vlan. Page 499 http://downloads.dell.com/manuals/common/powerconnect-5524_reference%20guide_en-us.pdf