I only see secure web page services enabled in your config - HTTPS (443), if you want normal web access you need to enable port 80 services with

ip http server

Also for SSH session have you generated your encryption keys yet ?

crypto key generate

Yes, it is enabled. At least that is what I see here:

BPL_Dell3348# show ip http
HTTP server enabled. Port: 80
BPL_Dell3348# show ip https
HTTPS server enabled. Port: 443
Certificate was generated.

Just getting the thing to to work http would be the best right now. And as for https, I did generate a certificate. But in either case I don't get anything, not even a log in. I did clear my browser cache and I have reduced my internet security to low an enabled pop-ups. I can ping the IP address.  

Anyother thoughts.

Here is another wrinkle.

I tried to http to this switch via the "Run" command. A browser opened, I did get a user/password logon screen. When I enter that information the browser continues, but I only see a frame down the left hand side of the page and across the top. The frame does not fil out and the status line says it's done. So far I have only tried this on one PC with Explorer.

Any additional thoughts.

Thanks.

That was my suspicion -does your PC have a current version of IE or Firefox and proxy-server disabled in your Browse options.

Please try from a different PC to check this theory.....as it does sound like the 3348 is responding okay.

I finally got around to testing this on another PC running Windows 2000 and IE 6.0. It works. Go figure. I guess the older the better in this case. But it will only launch by entering the http into the Run Command box instead of into the URL window in the browser. I will try some different things next chance I get.

Thanks for your input and thought it is appreciated.  :robothappy: