This is what I get when I do couple show commands:

Thank you for your replay. Here is the configuration:

!System Description "PowerConnect, 5.1.8.2, VxWorks 6.6"
!System Software Version 5.1.8.2

Thank you so much for clarifying that. I'll do the clean up and let u know the result. 

Thanks for the clean up.

Now I have another issue. Here is the situation:

I have three Vlans vlan1, vlan10, vlan20

Vlan1 ip: 192.168.0.2

Vlan10 ip: 192.168.10.1

Vlan20 ip: 192.168.20.1

I want to keep vlan 1 for now in order to have smooth migration for the users and servers that we have to the other vlans. All users now are on Vlan 1. 

The problem is that I can't ping from Vlan10 and Vlan 20 to Vlan 1 hosts. I only can ping Vlan 1 ip interface.

Vlan 10 and 20 can ping each other ( interface and hosts can communicate). 

I'm managing the switch using telnet to vlan 1 ip interface. I'm guessing that the switch is blocking the traffic to go from the other vlans to vlan 1 hosts because I'm managing the switch using that interface. I've tried to assign OOB an IP and us it as the management but still Vlan 1 hosts can't communicate. 

Any ideas on how to make vlan 1 routed and reachable from other vlans ?

Thanks,