With 802.1x authentication using true mobile wireless card (1300,1350,1400,1450) using G, I have troubles getting back IP addresses. I do suceed authentication but do not get an IP. I am on the most recent drivers of the True Mobile. If I switch the IBSS mode to (802 b only) or set the rate to (11) I do get an IP back. I seem to have troubles getting back an IP with G particularly. I do get back IP addresses using other wireless cards on G (Dlink,Cisco,Broadcom,Intel,Linksys) but have a lot of trouble with True Mobiles. Any suggestions?
Access Point -Here is what we are using Cisco 1200 on IOS on 12.2(13)JA
Radius Sever - Steel Belted Radius 4.71
Authentication - Peap Authentication with active directory
It is a negotiation standard that was poorly implemented across manufacturers. I believe it only works correctly if you have WPA working properly. It isn't needed otherwise.
802.1x is a standard that was implemented for security so I thought. If I uncheck 802.1x I am guarenteed to fail authentication. I do not believe this to be an 802.1x isssue since if I switch the True Mobiles to use just B they work fine. I believe the issue here is how true mobiles change between B/G/A
johnallg
2 Intern
•
7280 Posts
124
0
Posted October 11th, 2004 19:00