Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
UNSOLVED
CM
crisp mark
3 Posts
0
27182
November 15th, 2006 17:00
ethernet controller / driver requirement
Hi,
I've recently had commincation issues between my plotter and autocad program, decided to wipe my entire system clean and reload all the programs from scratch. Plotter and program working fine, but I've lost all the info re the ethernet controllers and drivers for my dimension 4600. Trawled throgh the Dell website and nothing relates back to the 4600 for drivers, does anyone have any useful info that could help me re-install the drivers so that i may access the web once again?
Hope you may be able to help.
many thanks and regards
Mark.
- jtpgbr,Did you try the drivers at the following site:Steve
crisp mark
3 Posts
485
0
Posted November 19th, 2006 15:00
thanks for the help, managed to get the updated drivers through Dell and installed as you saidthankscrisp mark
3 Posts
485
0
Posted November 19th, 2006 15:00
I'd suggest phoning Dell, told them of my problem, they directed me to a url site that had the exact drivers needed, problem solved, for me anyway, hope you have the same results.- QtheBard,It is very difficult to help you without knowing which model computer you have and which network drivers you need to intsall. In general, if you click on the Technical Support link at the top of the forum, you can find all drivers by entering your model number or service tag. On most models it is necessary to install the chipset drivers before installing any other drivers.Steve
gamer11355
1 Message
485
0
Posted January 16th, 2007 16:00
I'm having the same problem. I had to completely reload my computer with Windows XP and now my ethernet isn't working. When I look at the device manager it has "ethernet controller" listed with a yellow question mark and exclamation mark. I reloaded the chipset from my orginal resource disk and the Intel 10/100 LOM, but nothing works. My Dell is a Dimension 8250. Does anyone have any ideas?
Thanksfreemycatfish
14 Posts
53
0
Posted February 12th, 2007 16:00
For anyone interested. I have a Dell 3100c and had a problem with the driver for the Ethernet Controller after a drive format. I went to the link above suggested by "Volcano 11" (Thanks) and downloaded the Diagnostics Utility found there. I ran that and the problem vanished.
volcano11
2 Intern
•
27973 Posts
485
0
Posted November 15th, 2006 21:00