UNSOLVED

arena

updated

23 years ago

A

arena

18 Posts

0

8816

November 3rd, 2003 08:00

EXTREMELY Frustrating XP/Win98 Networking Problem

I have a cable modem connected to a router that shares
the internet access across 4 ports.  One port is for my
computer running XP, one port is for my sisters computer
running windows 98, and two ports are open.  Last night a
few of my friends brought their computers over for some
online games, and I didn't have enough ports to go around
so I unplugged my sisters computer.  When I plugged it
back in today, it can still access my computer through
the network, but it can no longer access the internet.

I didn't change a single setting.  I've done everything I
can think of including unplugging everything and
restarting, double checking that DHCP was enabled on both
machines, and reconfiguring the router.  Still no
internet connection.

What happened, and is this going to happen everytime I
unplug the ethernet cable from the port?

Thanks in advance for any help.
  • jmwills

    2 Intern

    •

    11984 Posts

    873

    0

    Posted November 3rd, 2003 11:00

    Try releasing the IP Address from the machine or powering down the router, plugging in your sisters machine and then powering the router back up.
  • arena

    18 Posts

    873

    0

    Posted November 3rd, 2003 20:00

    I had already tried that, as stated in my previous post, but I tried again according to your instructions and that did not solve the problem.  I ran winipcfg on the Windows 98 machine and it has been assigned the IP address 192.168.1.101 which sounds correct to me, since the XP machine is set to 192.168.1.100.  However when running winipcfg the adapter was set to PPP instead of the Ethernet card.  I don't know if this is somehow related to the problem, but I believe there is some error in the settings on the 98 machine since it has the correct IP address but still cannot access the internet.

     

    Does anyone know what the correct settings should be?  I do have DHCP enabled.

     

    Thanks for any help.

  • jmwills

    2 Intern

    •

    11984 Posts

    873

    0

    Posted November 3rd, 2003 21:00

    DSL or cable?
  • arena

    18 Posts

    873

    0

    Posted November 3rd, 2003 23:00

    Cable, as stated in my post.
  • volcano11

    2 Intern

    •

    27973 Posts

    873

    0

    Posted November 4th, 2003 01:00

    First, note that in winipcfg, the PPP adapter is a dialup connection.  On the initial screen in winipcfg you can use the arrow next to PPP adapter to change it to the ethernet adapter.  The PPP connection is not your problem.  Check the IP address of your ethernet adapter in winipcfg.  Are you still getting an IP address in the range 192.168.xxx.xxx?  If so, do a release and then a renew and see if you can connect?  Can you ping an IP address on the internet (try opening a command prompt and typing: ping 63.211.236.244 and then hit the enter key)?  Now try to ping microsoft.com by using the command prompt and typing - ping www.microsoft.com Does this work?

    Steve

     

  • arena

    18 Posts

    873

    0

    Posted November 4th, 2003 02:00

    The 192.168.1.101 IP address is the one listed under the ethernet adapter, sorry for any confusion.

    A ping of the IP address 63.211.236.244 after releasing and renewing the ethernet adapter yields the following results:

     

    Pinging 63.211.236.244 with 32 bytes of data:

    Reply from 63.211.236.244: bytes=32 time=59ms TTL=54

    Reply from 63.211.236.244: bytes=32 time=59ms TTL=54

    Reply from 63.211.236.244: bytes=32 time=59ms TTL=54

    _

     

    Pinging microsoft.com yields the following results:

     

    unknown host www.microsoft.com

     

    Any ideas?  Thanks again.

  • volcano11

    2 Intern

    •

    27973 Posts

    873

    0

    Posted November 4th, 2003 03:00

    Since you can ping Microsoft by its IP address but not by its URL, it suggests something is wrong with your DNS settings.  In TCP/IP properties, click on the DNS tab and make sure that DNS is set to the either disabled (the normal setting for a cable connection through a router - the router should obtain the DNS settings from the cable modem) or is set the same way as the DNS setting on the Windows XP computer.  

    Steve 

  • arena

    18 Posts

    873

    0

    Posted November 4th, 2003 07:00

    On the XP machine the settings are as follows:

     

    Under "General", "Obtain DNS Server Address Automatically" is selected.

    Under "Advanced", "Append primary and connection specific DNS suffixes" is selected, and the box next to "Append parent suffixes of the primary DNS suffix is checked".

    Also, the box next to "Register this connection's addresses in DNS" is checked.

     

    What settings should I use on the Windows 98 Machine in light of this?

     

    Thanks again.

  • volcano11

    2 Intern

    •

    27973 Posts

    873

    0

    Posted November 4th, 2003 12:00

    On the Windows 98 machine, TCP/IP properties, DNS tab, set DNS to disabled.

    Steve

  • arena

    18 Posts

    507

    0

    Posted November 4th, 2003 20:00

    On the Windows 98 machine, I can ping the router at 192.168.1.1 through command, and I am being assigned the correct IP address, but when I try to access 192.168.1.1 through internet explorer, which should direct me to a router configuration screen, I get a "page cannot be displayed error".

     

    So I connected to the internet using my old dial up account, and even once I was connected I got the same "page cannot be displayed" error when trying to connect to www.msn.com.  But I know I was connected at that point, which leads me to believe there is some problem with Internet Explorer.

     

    What should I try next?  Thanks again.