UNSOLVED

shiner_guy

updated

21 years ago

S

shiner_guy

65 Posts

0

14555

March 19th, 2006 00:00

integrated network adapter

i am working on a dim 2400 with the integrated ethernet adapter and my problem is i reinstalled my OS and everything went fine but when i installed my ethernet driver and plug in my cable its still telling me that there is no cable plugged in and the light isnt coming on at the ethernet port or anything any heko would be greatly appreciated
  • volcano11

    2 Intern

    •

    27973 Posts

    858

    0

    Posted March 19th, 2006 04:00

    Did you install the chipset drivers as the first drivers installed after reinstallation of Windows? Without the chipset drivers, Windows will not be able to recognize or install drivers for many other devices. Once the chipset drivers are installed you need to install the drivers for your network adapter, video adapter, audio adapter, and modem.

    Steve

  • shiner_guy

    65 Posts

    858

    0

    Posted March 19th, 2006 18:00

    yes i installed the chipset drivers first but thanks for the comment
  • 858

    0

    Posted March 20th, 2006 01:00

    Is there any way it could be a bad cable?  Do you have another one you could test it with?  Hope this is helpful.

     

    Cricket_1972

    XPS600

    XP Pro SP2

  • shiner_guy

    65 Posts

    858

    0

    Posted March 20th, 2006 21:00

    well no its not a bad cable, i've got two computers already so i just pulled the network cable out of my spare that runs fine and plugged it into the one thats giveing my problems but thank you for your comment. I've tried everything that i know of to fix this i just dont know whats wrong. Could it be that the port itself is just bad? the rest of the computer runs fine i just cant get online and the orange light that is supposed to come on when you plug in your network isnt coming on and all the dell lights are green
  • 858

    0

    Posted March 21st, 2006 00:00

    Was it working prior to the reinstallation of Windows?  Also could it be disabled in the BIOS?

     

    Cricket_1972

    XPS 600

    XP Pro SP2

  • BBraxton

    2 Intern

    •

    2037 Posts

    858

    0

    Posted March 22nd, 2006 12:00

    ping

    ?

    You will need an address. Do you have DHCP set up properly?

    Start | Run "cmd" [press Enter]

    IPCONFIG /ALL >My.txt

     

    EXIT [Press Enter] to leave DOS pane

    will create a report of pertinent values. Make sure you are getting a TCP/IP address and that the other numbers look correct.

  • shiner_guy

    65 Posts

    858

    0

    Posted March 22nd, 2006 18:00

    i tried everything i could, yes it was enabled in the BIOS it was working before the reinstall of windows i just cant figure it out so i just put in a pci network card and it jumped right on the net so im just going to use that but thank all of you for your suggestions