I set up a network between my new xps 400, and an older dimension and my laptop inspiron 8100. They are all running xp. They are hooked up on a Linksys wireless g router, Model WKPC54G. I was using my laptop wireless but it was unstable so now all of the computers are wired. On the main computer where I first set up the network, all three computers show up as workgroup computers but when I click on the older dimension or laptop, I get the message "The server (computer name) cannot be found on the network". When I go to the older dimension or laptop and click on show workgroup computers, I get a message access is denied. All three are able to get on the internet.
On any computer running Windows XP with SP1, disable the Windows XP firewall. It will not allow File and Printer Sharing. On computers running Windows XP with SP2, make sure that the Windows XP firewall has File and Printer Sharing checked off on the Exceptions tab. If you are running any third party firewalls, like those provided by such programs as Zone Alarm, Norton Internet Security, or McAfee Security Suite, make sure they are configured to allow local network traffic.
Steve, I did get the network running. I had to turn off the firewalls on all computers and had to turn off Norton Security on the Dimension and Laptop. Do I not have to have any security on the Dimension and Laptop and do I keep all of the firewalls turned off? When I turn the enable network protection on the Trend Micro PC-cillin virus program on the XPS (server) the network will not work. How do I get security for my network?
You need to figure out how to properly configure the firewall (you should only be running one firewall) so that local network access is allowed. This is usually fairly simple, but I am unfamiliar with the program(s) you may be using so I can't provide details.
volcano11
2 Intern
•
27973 Posts
309
0
Posted April 29th, 2006 13:00
On any computer running Windows XP with SP1, disable the Windows XP firewall. It will not allow File and Printer Sharing. On computers running Windows XP with SP2, make sure that the Windows XP firewall has File and Printer Sharing checked off on the Exceptions tab. If you are running any third party firewalls, like those provided by such programs as Zone Alarm, Norton Internet Security, or McAfee Security Suite, make sure they are configured to allow local network traffic.
Steve