Hello, whenever I turn on my computer it says scanning for signal, no signal found then it starts up and shows the dell logo for a second then goes black screen and does the same thing over and over again. Please help anyone
Locate the CMOS jumper by referring to the motherboard manual and how to clear the CMOS. In general, the CMOS jumper is three pins located near the battery. In general, CMOS jumper has positions 1–2 and 2–3.Move the jumper from the default position 1–2 to position 2–3 to clear CMOS.
Alright I figured out how to do this and I did it I cleared it I changed the battery as well. But i powered it back on and it was say continue with setup and to change date and time so it took me there and I did that , I exited out and it still doing the same thing. Any thing else u recommend doing pls help
looks like no POST despite clearing cmos. now remove all hdd ssd as it was suggested already. Remove all usb devices. Remove discrete gpu if any. Remove all memory sticks and reinstall only one memory in DIMM1. Test each memory in this way.
You only have 2 RAM (memory) sticks at the most. Remove the 2nd one and see if it boots. If not, try replacing the one RAM stick with the other and see if it boots. Remember to have PC unplugged from electrical outlet any time working on the inside of it. I'm not 100% sure it's the RAM, so...
redxps630
11 Legend
•
16434 Posts
•
83185 Points
396
0
Posted July 23rd, 2022 06:00
First try replace cmos battery with a brand new CR2032. Then try clear cmos settings by motherboard ”clear cmos” jumper.
https://www.dell.com/support/manuals/en-us/optiplex-3050-desktop/optiplex-3050-desktop-sff-om/system-board-layout?guid=guid-8fe1ea7f-428e-4c10-a496-7cdb4ab74b65&lang=en-us