I have an m1000e blade enclosure. The a/c went out in our building so for the time being I have (in addition to the auto-sensing fans in the back) a large box fan pointed at the front of the enclosure, pointed directly at the m600s. Everything works fine and by hand the m600s feel cool and definitely are NOT overheating. However, when I switch to a smaller fan (and unplug the larger box fan) and let it run for even a few seconds the temperature sensor in my CMC shoots up about 4 degrees almost immediately (from 28C to 32C, which is about 7 degrees fahrenheit). I continue to let the small fan run and putting my hand on the m600 it still feels very cool...definitely not hitting the 89 degrees fahrenheit like the CMC says.

Now, this wouldn't be a problem as the blades are running fine. However, I don't want the chassis to shut down if it ever hits 40 degrees celsius. Where are the temperature sensors in the m1000e so I can point the fan at both the blade and the sensor and thus cool the blade and the temperature sensor at the same time?