UNSOLVED
PE 730: PSU error on boot
Hello,
I'm having a problem with one of our PowerEdge 730 servers. When I'm rebooting the server, I sometimes get the error:
"PWR1006: The system halted because system power exceeds capacity".
The LED display then becomes red and the server doesn't boot and is not available via iDRAC. I have to wait for a few moments/minutes, then iDRAC is available again and I can boot the server without any issues afterwards.
There are two 750W PSUs (PN: 0V1YJ6A00) installed and the power consumption on this machine is far from any limits (like 150W on average).
Anybody got any ideas on that?
bjosch
1 Rookie
•
5 Posts
12942
0
Posted June 22nd, 2016 22:00
Hi Robert,
I should have mentioned that we have three servers with the exact same configuration (no PCIe cards, 7 hard drives) and only this one has the problem.