UNSOLVED

Saruulsaikhan

updated

12 years ago

1

19487

November 30th, 2014 22:00

R910

I have a R910 with 2 x E7540 @ 2.00GHz, I installed 32x32GB RAM into the following slot:

Riser A,C

Riser B,D

However the system cannot boot:

No configurable memory detected.

System Halted.

The RAM I am using is Samsung M393B4G70DM0-YH9.

 Is it mean that 32x32GB RAM is not supported?
  • theflash1932

    11 Legend

    •

    16255 Posts

    439

    0

    Posted December 1st, 2014 05:00

    The R910 supports up to 1TB of RAM using 16GB DIMM's. The only way 32GB DIMM's would work is if a BIOS update added that functionality. Since updating the BIOS is standard practice before upgrading hardware, you would have already done that, meaning 32GB DIMM's simply won't work in this system.

  • Dylank

    1 Rookie

    •

    104 Posts

    439

    0

    Posted December 1st, 2014 15:00

    the 910 definitely supports 32GB sticks as I've used them before in testing, the 910 white pages are just out of date.  I would attempt a bios flash if you can find some smaller sticks to get it to post and allow you to run the bios update.

  • theflash1932

    11 Legend

    •

    16255 Posts

    439

    0

    Posted December 1st, 2014 20:00

    Fine, like I said, it is possible, but like the spec sheets, the corresponding BIOS versions are likewise out of date, and without a BIOS update, 32GB DIMM's won't work.

  • 439

    0

    Posted December 1st, 2014 20:00

    thank you all

    i installed bios update (2.10) but it's same 

    i think this memory is 4Gb DRAM.

    intel E7540 CPU not supported this ram.