Solved!
Go to SolutionDELL-Sam L
Community Manager
•
8058 Posts
•
34386 Points
926
0
Posted March 15th, 2021 12:00
Hello Nick_Bailey316,
With a MD1400 it can only be connected to a single server. Here is the link to the support matrix & if you look on page 6 it lists the server limits. https://dell.to/38IlHyZ
DELL-Josh Cr
Community Manager
•
9693 Posts
•
43676 Points
2635
0
Posted May 4th, 2017 15:00
If you use the H810 or the H830 they are dedicated to a single blade and not shared to both of them.
DELL-Josh Cr
Community Manager
•
9693 Posts
•
43676 Points
2635
0
Posted May 4th, 2017 15:00
Use the external shared PERC, it allows for multiple blades to access the same storage.
DELL-Josh Cr
Community Manager
•
9693 Posts
•
43676 Points
2635
0
Posted May 4th, 2017 15:00
To the same blade or different ones?
Nick_Bailey316
1 Message
935
0
Posted March 15th, 2021 11:00
Josh i have a customer that bought the MD1400 to expand their VRTX chassis as the 1200/1220 are no longer sold. can they map this to multiple blades by using a shared PERC? If so what shared perc do i need to look at?
DELL-Josh Cr
Community Manager
•
9693 Posts
•
43676 Points
2635
0
Posted May 3rd, 2017 18:00
Hi,
Yes, those are the correct cards for those storage devices. There is also the Shared PERC-E which allows you to share the storage among all of the blades.