UNSOLVED

Newsco

updated

20 years ago

N

Newsco

13 Posts

0

8578

May 4th, 2007 17:00

745N Raid Failure.

Hi,
I have a 745N with 4 SATA split into 2 RAID5's over the 4HD's the Second raid is showing 2 hard disks in light grey, and a RAID Fail message at the top.  I am seeing this in the Raid configuration untility on bootup.
 
In Windows Application Server we normally can see a C: drives (boot) and a D: (Data Drive)
 
I can't find a way of bringing these online.  I am not very conversent with raid.  The server was delivered pre configured and is out of warranty.
 
As usual there is some critical data on the partition that appears not to be on our backup tapes.
 
Any help (as you quite imagine) would be much appreciated.
 
Please do not have ago at me for the data not being on the tape backup, this was not my reponsibility.
 
Thanks in advance.
John.
  • pcmeiners

    6 Operator

    •

    1771 Posts

    555

    0

    Posted May 6th, 2007 16:00

    "I have a 745N with 4 SATA split into 2 RAID5's over the 4HD's the Second raid is showing 2 hard disks in light grey, and a RAID Fail message at the top.  I am seeing this in the Raid configuration untility on bootup."
    This is very confusing, Raid 5 requires a minimum of 3 drives per array, do you have 6 drives or 4. If only 4 drives, you could only have two raid 1 arrays. Please clarify.
     
  • Storagetalk

    221 Posts

    555

    0

    Posted May 7th, 2007 11:00

    He's saying he has 4 physical disks that share 2 raid-5's and two of the disks in the 2nd raid 5 are showing offline, but they're not offline on the first Raid-5.  This means the proble more than likely resides at the container level.
     
    Go to the CERC BIOS and then disk utilities, run a verify on all the disks.  If any of those disks fail the verify, then more than likely you will not be able to recover that disk.  If all pass, then go to the array configuration utility from within the CERC BIOS and highlight the container through manage container.  Press Ctrl-r.  Should start a rebuild process.  Cross your fingers and see how things go.  If the disks go back to a failed state or the volume doesn't showup in Windows, you're done.
     
    Two disks down in a Raid-5 = you're going to backup.
  • Newsco

    13 Posts

    555

    0

    Posted May 8th, 2007 06:00



    Storagetalk wrote:
    He's saying he has 4 physical disks that share 2 raid-5's and two of the disks in the 2nd raid 5 are showing offline, but they're not offline on the first Raid-5.  This means the proble more than likely resides at the container level.
     
    Go to the CERC BIOS and then disk utilities, run a verify on all the disks.  If any of those disks fail the verify, then more than likely you will not be able to recover that disk.  If all pass, then go to the array configuration utility from within the CERC BIOS and highlight the container through manage container.  Press Ctrl-r.  Should start a rebuild process.  Cross your fingers and see how things go.  If the disks go back to a failed state or the volume doesn't showup in Windows, you're done.
     
    Two disks down in a Raid-5 = you're going to backup.


    Thanks, I thought as much.  What I've decided to do (having the weekend to think about it) is send the hard disks to OnTrack data recovery for analysis - they will give me a list of what they will be able to recover before we have to commit. 
     
    Having said that I now need to ask 2 more questions?
     
     
    1. Are the disks in the NAS unit normal SATA disks or are they of a special type?
    2. Is it possible to get 4 more Sata disks and clone the existing ones (We have Acronis 10) so that we have a backup in case something happens in transit to OnTrack?

    If we are able to clone them then I can try the rebuild without too much risk as well.

    Thanks in advance for your respnses.