Solved!
Go to SolutionMD3000 Raid Controller Module Memory Parity Error
MD3000 has two controllers. One of the controller failed. SO I replaced it with an used, but working controller. All errors are gone, except one "RAID Controller Module Memory Consistency Error".
Recovery Guru recommends steps which I followed without luck.
Looking for help in this forum.
Paul
DELL-Sam L
Community Manager
•
8139 Posts
•
34682 Points
1286
0
Posted September 26th, 2014 06:00
Hello Paul,
Glad that flashing the firmware resolved your issue.
Please let us know if you have any other questions.
DELL-Sam L
Community Manager
•
8139 Posts
•
34682 Points
1286
0
Posted September 24th, 2014 14:00
Hello Paul,
What you may need to do is on the replacement controller to pull the raid battery and wait about 2 minutes then reinsert it again. Also what I would try to do is to flash the firmware on the system as well.
Please let us know if you have any other questions.