UNSOLVED
Closed
N
Nepthys425
1 Rookie
•
5 Posts
0
243
May 25th, 2023 12:00
RAID1 Configuration for Precision 5820 Machine with Linux (RHEL8) OS - VROC Key Installed
Good afternoon,
I wanted to reach out to see if there was anyone who might be available to help me with an issue I am having. When I first turned on my machine, if I did not input anything right away it would load to the RHEL8 installation/configuration menu. I had to restart to get to the BIOS and the Intel VMD Technology menu. I was able to set up a RAID1 configuration for my 512GB NVMe SSDs (2). However, when I saved and tried to reboot the machine it booted to a Pre-Boot System Performance Check which it says is a success and the hardware has been scanned without any issue. However, it also says that "No bootable devices were found. Possible causes could be a corrupt OS/image or a boot device is not enabled in BIOS Setup." Upon review, it appears to me that I have enabled all that I needed to, but it is possible that I could've missed something. Can anyone be of assistance with why this may be occurring?
154
0
Posted May 26th, 2023 08:00
I believe it is RHEL8.7
112
0
Posted May 30th, 2023 09:00
Correction to my previous post. It is Red Hat Enterprise WS v8.0
108
0
Posted May 30th, 2023 11:00
Well, my question was due to that link mentioning that a version before the latest had issues to boot in your situation. Going backward I dunno.
mazzinia_
6 Operator
•
1512 Posts
•
6322 Points
162
0
Posted May 26th, 2023 01:00
Hello,
I cannot read the full article but
https://access.redhat.com/solutions/6996298
which version of RHEL 8 do you have there ?