UNSOLVED

Tony12

updated

6 years ago

T

Tony12

1 Rookie

•

2 Posts

0

1219

August 13th, 2020 09:00

T7610 stuck on 'initializing' during boot up

I'm having the same problem. I have a Dell Precision T7610, '123' lights are on, and it is stuck on 'Initializing'.

The screen says:

LSI Corporation MPT SAS2 BIOS

MPT2BIOS-7.31.00.00 (2013.02.28)

Copyright 2000-2013 LSI Corporation.

Initializing.../

 

I've tried rebooting while pressing F12. Powering off and removing the CMOS battery for 30 min. Rebooting with a BIOS recovery key. No luck yet. does anyone know a solution to this problem?

  • mw7301

    1 Rookie

    •

    20 Posts

    742

    0

    Posted March 30th, 2021 09:00

    I'm having the same problem, but if I power the system off/on it usually comes up but its getting worse. Did you ever figure out what was causing this?

  • mazzinia_

    6 Operator

    •

    1534 Posts

    •

    6405 Points

    705

    0

    Posted March 30th, 2021 14:00

    If not being used, what about turning off the lsi controller in the bios ?

  • bradthetechnut

    9 Technologist

    •

    9712 Posts

    •

    40924 Points

    684

    0

    Posted March 30th, 2021 18:00

    The T7610 was introduced 8 years ago.  If not in the last 5 yrs., try replacing the size 2032 CMOS battery and post an update.

    What color is your power light during the error code and is it blinking?