My refurbished laser printer has recently began to start printing, then come up with an error, and all the lights flash. Though I do not have a 128mb memory module, I tried the firmware update, but the program cannot see the printer. Dell Support is still trying to associate my service tag with my account since it is refurbished from the dell outlet aka they won't help me. Any ideas on what is wrong?
All the LEDs blinking is a diagnostic code for a “service error” which will often indicate the printer needs to be serviced. After receiving the service error code quickly double press the Continue button and the printer may display a second level diagnostic code (a different series of LEDs). Please make note of the LED indicators and contact Dell Technical Support with this information.
This error code will generally indicate that the printer needs to be serviced. I would advise contacting Dell Technical Support if you are still under warranty as the printer may need to be replaced.
Make sure to include information on the first and second set of diagnostic LED codes that you got. You may also want to try to quickly double-press the Continue button when you get the second level of error LEDs as you may also get a third set of diagnostic LED codes; include this information also when you contact Technical Support.
Here's how I got the firmware upgrade to see the printer. (The easiest way is to use a USB cable and let the computer install the printer, the USB flash will then see it) The rest is just a rant as the firmware didn't solve my problem.
I have been going through this with both the 1700 and the 1700n. We ordered them with the 64 MB upgrade. Printer would function correctly without the RAM but when RAM was added all lights flash. Performed the firmware upgrade on the 1700 and after talking with Dell support, the 1700n. This didn't resolve the problem. They are now sending out another RAM module
I had this problem also. By going through Dell's troubleshooter (pressing the continue button and reading the codes) I found my printer had an "NVRAM chip failure" and needed out of warranty service. After reading further on this forum I found by unplugging the printer, removing the toner cart. and shaking it (the toner cart), waiting a few minutes and putting it all together again, the error was cleared. I just saved myself Dell's $39 minimum service fee. And all they would have done is to tell me the above.:smileymad:
DELL-Stephen S
2 Intern
•
1396 Posts
775
0
Posted December 21st, 2004 12:00