mag446,

When using the ADF, The scanner bulb light up and stays in the same location, the spot closest to where the paper leaves the document feeded. Clean the glass with a lint free cloth, like a coffee filter.

Rick

Thanks for responding so quickly. I did clean the glass, under the lid, lifted the "hood" and cleaned the rollers, and anything else I could see. I used Qtips to clean in tight places and it still produces the line. Any other suggestions? By the way, never thought of the coffee filter for cleaning. I use alcohol wipes.

mag446,

I suggested a coffee filter because they recommend a lint free cloth and a coffee filter is lint free and usually very cheap, since most people have them around.

Look at THIS ARTICLE before it gets removed.

Rick