:mansad:
I contacted Dell Tech and explained my problem...They want to send me another printer but after reading all the post concerning the AIO962, I think it's not going to help the problem.
Problem: I want to leave my printer on to detect an incoming Fax or a voice call.
I 1st tried to open my AIO962 printer set-up utility and clicked on "Detect Fax Calls" and saved the new settings. It will not save and returns to Auto answer after 1 ring or manual. whichever it sets it's mind to do at the time.
I then set my answering machine to 2 rings and my fax to 5 rings. ( I understand this works)....well now I have my answering machine set for 4 rings and my AIO962 set for 5 rings. It still does not work.
I also uninstalled the printer software and re-installed twice.
Any ideas.
I'm happy will my Dell computer but Dell should not put out a product untill they get the bugs out of it. It's called QC!!!
I need ideas on how I can get my fax to detect an incoming call before my answering machine picks up.
Your problem is due to a software bug in the Printer Setup Utility that you are using to change your 962 fax settings. This issue has been covered in depth in this thread. Happy reading!
I did read that post before. Thank you very much. I'm staying away from the PSU. As stated before, I set the 962 to 5 rings and my answering machine to 4 rings. ( also tried 5 and 2 ).Nothing helps.
Also tried to Fax 9 pages and the party only gets blank pages with my header. Yes...I loaded them face up as instructed. Any other ideas?
RE: Are you sure that the 'Auto Answer' button is enabled (light should be lit green) on the front Op Panel of the 962?
Yes it's on. I lowered my connection speed and now I can send and receive faxes manually. I still can't get it to detect an incoming Fax from a Voice Call. After my answering machine leaves a greeting, it will not allow the Fax to receive. Everything shuts down.
I can receive a Fax if I have the "Auto Answer" button on and the Fax set less then my answering machine (4 rings).
We have a all in one 962. On Wednesday night we had massive storms here and now I can't send or receive faxes. I have called Dell and been on hold for over 30 minutes 3 separate times and no one ever came on. We are running a business and must have access to a fax. HELP!! the error reports say that there is no dial tone. I have had the phone company check the lines, I have changed the cord from the wall jack to the fax machine. When trying to receive a fax, the machine never picks up. It should answer after one ring. I would appreciate any help anyone can offer!!
Printboy007
569 Posts
195
0
Posted August 1st, 2005 19:00