UNSOLVED

gigiwhite

updated

18 years ago

G

gigiwhite

8 Posts

0

12931

June 27th, 2008 00:00

Dell AIO A960 cannot open from Start

When I click on Dell AIO Center in the Start menu, I get a message "Preparing Dell AIO Center for first use.  Searching for scanning applications.  Please wait."  The "wait" never stops unless you end the program.  My printer is not new, so this is not a first use.  I have uninstalled and reinstalled and still get the same message.  I also downloaded recommended drivers from Dell.  Anyone else had this problem?
  • PudgyOne

    11 Legend

    •

    30315 Posts

    •

    106638 Points

    459

    0

    Posted June 27th, 2008 01:00

    Disconnect your printer. Download and run this patch to completely remove the printer from your computer. Restart your computer.

     

     

    Now go to drivers and downloads/select product/printers/select your printer. Download drivers and firmware.

    Install your printer drivers. You'll be prompted when to connect it.

    Then install the firmware.


    Scanning


    Scanning using USB connection, open the Dell All-In-One Center, click on scanning and copying and scan from there.


    Scanning wirelessly, use the scan buttons on the printer.

  • gigiwhite

    8 Posts

    459

    0

    Posted July 4th, 2008 12:00

    I tried this and it wouldn't work.  I really don't want to go from USB.  Any other ideas?  Lots of people having this same problem.

    Thanks.

  • PudgyOne

    11 Legend

    •

    30315 Posts

    •

    106638 Points

    459

    0

    Posted July 4th, 2008 16:00

    Usually, after you install any of the Dell printers, the Dell All-In-One Center will do the initial scan for programs to send scans to. If has worked for me many times. You ran the patch, restarted the computer and installed the latest Drivers. Do NOT use the disk.

     

    XP Drivers

     

    Vista 32-bit Drivers

     

    You also installed the latest firmware for the A960, correct?

     

     

  • gigiwhite

    8 Posts

    459

    0

    Posted July 5th, 2008 21:00

    Rick,

    I have Windows XP not Vista.  Does this matter with the patch?  If not, I will try again.

    Thank you.

    Gigi

  • PudgyOne

    11 Legend

    •

    30315 Posts

    •

    106638 Points

    459

    0

    Posted July 6th, 2008 03:00

    The patch is more like a cleaner. It will remove the printer. Yes, you can run it on a XP Machine. If you don't feel safe running it, then since you have XP, make sure the printer is completely removed from your computer. Look at start, all programs, Dell Printer and make sure your printer is un-installed. Also check the control panel.

     

    Restart your computer(very important) 

     

    The install the XP drivers from the link above. You'll be prompted when to connect the printer.

     

    Here's what the patch reads...

     

    This package includes a Vista Cleanup Assistant to remove older Dell printer software from your computer that may not be compatible with Windows Vista after upgrade. This is because some of the older Dell Printer software features may not work properly which was previously installed in Microsoft Windows XP/2K.

    Then let the Dell All-In-One Center do it's thinbg. When it's complete, that should be the last time it does it, unless you have it search again.
    Message Edited by PudgyOne on 07-06-2008 12:12 AM
  • gigiwhite

    8 Posts

    459

    0

    Posted July 6th, 2008 17:00

    Rick,

    I have done everything you suggested and once the printer is installed again with the drivers, firmware, I still get the same thing.  "Preparing Dell All-In-One Center for first use.  Searching for scanning applications.  Please wait."  You could wait for days and nothing else will happen.  I don't know what the problem is but I don't think it can be fixed.  I think I can go around all this to scan but I will not have the capability to edit anything.  I get a completely different screen from what I got before.  Thanks for all your help.

    Gigi

  • PudgyOne

    11 Legend

    •

    30315 Posts

    •

    106638 Points

    459

    0

    Posted July 6th, 2008 17:00

    Did you ever go to Windows Updates and get the recommended updates. net.framework would be on possibility. I have a fully updated computer. I took all the recommended updates.

     

    Also do you have the latest Java?

  • gigiwhite

    8 Posts

    459

    0

    Posted July 7th, 2008 15:00

    I have the latest Java, windows updates, and I have NET.framework 1.1 and NET.framework Hotfix (KB928366).  When I try and download other NET.framework, I get a message that says that this computer does not meet requirements to install software.  I have a Dell Dimension 4550 with 2.34GHz, 768 MB RAM, running Windows XP.  My computer recently crashed and I have had to reload everything and have had all kinds of problems.  My system probably needs more memory and I can only install another 256MB.  So I may be looking at buying a new computer. I'm getting pretty frustrated.  I really appreciate everything you are doing to try and help.

    Gigi

  • PudgyOne

    11 Legend

    •

    30315 Posts

    •

    106638 Points

    459

    0

    Posted July 7th, 2008 15:00

    That explains a lot. When you install everything again, did you go here or use the drivers disk and install the drivers in this order?

     

    Desktop System Software or Notebook System Software
    Chipset or SMBus driver
    Processor Driver (if applicable)
    Video
    Audio (sound)
    Input Drivers (keyboard/mouse)
    Modem
    Network Card

  • gigiwhite

    8 Posts

    63

    0

    Posted July 7th, 2008 16:00

    I installed most everything from disc.  I have no clue in what order.  I am somewhat computer challenged when it comes to that sort of thing.  I had to download some drivers.  Had a problem with the multimedia and ethernet controllers.  Finally got that fixed.  Reloaded Windows XP, lost Money 2006, computer wouldn't let me use my backup disc because it supposedly was password protected.  I tried my password and it wouldn't recognize it as the correct password.  Just a mess!  I didn't know that the discs had to be installed in a certain order, so do I need to start over?

    Gigi