UNSOLVED
1147
0
Posted August 18th, 2015 03:00
I'd scanned with the ADF with no issue.
After placing the document on the ADF, push the scan button (the blue button in the picture), the following scan screen appeared. I scanned to USB without any problem. Have not tried the other 2 options though.
1147
1
Posted January 10th, 2016 07:00
I have exactly the same issue... the ADF works when I scan to USB, but not to the Computer... the printer is networked via Ethernet. Considering no response to you since July I'm not expecting much help. :(
1147
0
Posted January 14th, 2016 23:00
The Scan-to-Computer feature works without problem so far. Did not try Scan-to-Email though.
1147
1
Posted January 16th, 2016 05:00
The scan function works fine. The problem is the ADF doesn't function when doing a scan to computer. It does work in other cases, so I think it must be a setting rather than a hardware fault.
1147
1
Posted July 2nd, 2016 13:00
I have the same problem. Scan to computer does not use the ADF like scan to USB. This has to be a firmware issue. This functionality was one of the main reasons I recently purchased this printer.
1147
1
Posted July 19th, 2016 14:00
Add me to the same problem issue. ADF does not work on scan to computer. I'll try scan to USB tonight
1147
0
Posted August 22nd, 2016 21:00
Same problem. ADF doesn't work when scanning to computer.
If I use the Dell Printer Hub software, the ADF works. In other words, I have to place the document in the ADF, then go to my computer and use the Dell Printer Hub to start the scan. There is an option in that software to tell the scanner to use the ADF.
1147
0
Posted May 19th, 2017 15:00
ulli_s
1 Rookie
•
2 Posts
1147
1
Posted July 29th, 2015 02:00
.
But I have as well a question regarding the Dell E525w (multi function colour laser printer).
But before I want to describe the setting:
-- Printer is linked to my computer via wlan
-- Printer prints without problems
-- Copy function works without problems, including feeding the originals into the ADF
-- Scan function works when original is on the glass
but (here comes the problem)
-- ADF does not work with the scan function.
So, is there anything that I need to do specifically to make the ADF work for the scan function as well?
In case any additional information is required, I'm happy to provide it !
Thank you very much in advance for a workable solution !!
.