UNSOLVED
C
Collins_61
2 Posts
0
15589
January 27th, 2014 07:00
Dell V525 printer
After not using it for ages. I tried starting the printer but it freezes during initialization? I've tried unplugging and starting again. It consistently gets stuck just as the bar on the mini screen reaches 100%. I've tried holding all the other buttons, but nothing responds.
Anymore ideas?
Thanks IAN
Collins_61
2 Posts
584
0
Posted January 27th, 2014 09:00
Rick
Thanks for the response. I've tried this repeatedly and it still freezes at the same point. Any other ideas?
IAN
IAN,
Try reseating the Dell Series ink cartridges?
Make sure the printer is not in Demo Mode?
Articles I have are...
Troubleshooting Setup for the Dell 525w and 725w AIO Inkjet Printers
Troubleshooting Print Quality for the Dell V525w and V725w AIO Inkjet Printers
Troubleshooting Network Problems on the Dell V525w and V725w AIO Inkjet Printers
Rick
PudgyOne
11 Legend
•
30315 Posts
•
106638 Points
584
0
Posted January 27th, 2014 08:00
IAN,
Unplug the printer from the wall. Now remove the power brick for 60 seconds, this will reset any error messages the printer is getting.
An article that may help...
Troubleshooting Setup for the Dell 525w and 725w AIO Inkjet Printers
Rick