I should be grateful for advice on the following problem with my P513w.
I was trying to use the printer as photocopier. When I switched it on, I got the warning “Black Ink Low” but ignored it. I then successfully made 4 photocopies, all fine although a little faint. The fifth initially copied okay but then the print head seemed to run amok, overlaying the photocopy with a dense pattern of horizontal blue stripes about 1 cm wide. The printer screen is showing “Printhead Error There is a problem with the printhead. Please consult User’s Guide.” The nearest I have to a User’s Guide is the Dell P513w Quick Reference Guide, which says nothing specifically about this particular error message. I have however taken out the print head and cleaned the contacts as it recommends (page 16-17) but the screen message remains. The Guide says that in those circumstances I should contact Technical Support, which is what I am now doing!
PS Even though I have cleaned the contacts with a clean lint-free cloth, there still appears to be a buildup of ink around the othermost of one of the contacts on the central brass-coloured contact area. I am reluctant to press too hard for fear of causing damage. Can/Should I safely clean this eg with a damp cloth or a Q-tip dipped in methylated spirit? Should I clean the corresponding contact area on the printer itself?
The first option doesn't work for me: there is no response when I press the Setup button on the printer: the screen is still showing "Printhead Error: There is a problem with the printhead. Please consult User's Guide".
On the second option under "Check Ink Levels" I get no info on ink levels (althjough there are 2 green squares with questionmarks in them). I have however tried, under Select A Maintenance Task , Clean (Clean to Remove Horizontal Streaks) but response is "This option is not available because the printer is busy". I have also tried Clean Cartrridge: but get the same message.
I have again removed the print head and wiped the contact areas on the head and the printer itself with a clean lint-free cloth: no change. (Wiped both the copper and the central brass-coloured areas of the print head. Note that the outermost of the contacts in the brass area looks slightly odd, with some copper colour visible right next to it. There had been a slight build up of ink there.
I really don't know much about the P series inkjet printers. On the other inkjet printers, unplug the printer from the wall. Then remove the power brick for 60 seconds. This reset any error messages the printer is getting.
Afraid I have just tried your suggestion above but, once the printer powers up, the message returns. The "Setup" button still does not work. Any more suggestions please?
A thought: the printer head ran amok during a print job (though it actuaully seemed to overprint a perfectly satisfactory photocopy). Do you think I am getting the "printer is busy" message whenever I try anything via the computer because that print job is still in the printer queue? If so, how can I check and/or clear it? And wouldn't following the switching off process you described above have cleared any outstanding print queue? (Grasping at straws here: an expeensive call to Dell Tech Support looks on the cards!)
By the way, thank you for the photo you provided of the power block; it was quite useful in making crystal-clear what you were talking about. Some of the diagrams in the manaul are less clear.
Thanks for that. Have just checked: all printer queues blank.
No, I don't need the printer on to do copies. However you'll remember that because of the error message the "Setup" button seems dead. In accordance with the links you provided me in your first post, I was trying to use the computer to kickstart various processes like cleaning the print head and checking the ink levels, none of which have worked because the "printer is busy". BTW I have satisfactorily scanned some photos and transferred them across to my computer this pm so maybe the printer is right in suggesting the problem is with the printhead.
If my memory serves me correctly, your Dell printer was made for Dell by Kodak. Not sure if you'll find a similar solution about Kodak printers. There was a certain model the printhead needed replaced, not sure if this is the model.
You can try Contacting Dell, for free advice and see what they say.
Interested in your suggestion of talking to Dell for free advice. The printer is (3 months!) out of warranty so the only option I've been able to find is the fee-based service here. Is there something else free available?
Interested in your suggestion of talking to Dell for free advice. The printer is (3 months!) out of warranty so the only option I've been able to find is the fee-based service here:
PudgyOne
11 Legend
•
30315 Posts
•
106638 Points
2077
0
Posted January 5th, 2012 02:00
latestart,
Try...
Cleaning the Printhead on Dell AIO V313w, V515w, V715w, P513w, and P713W Printers
and
Troubleshooting Printhead Problems on the Dell AIO V313w, V515w, V715w, P513w, and P713W Printers
Shake the printhead before reseating the Dell Series Ink cartridge.
The Printer Does Not Recognize the Ink Cartridge or Only Prints in One Color
Rick