I have recently received the V515w all-in-one wireless printer. I followed the instructions carefully and am still having problems. The printer is indeed connected to the wireless network, but my computer (Dell Latitude E6400 Laptop) does not recognize it. I've tried to install the software tens of times by now, both with the wireless option and the USB option. Surprisingly, the USB option installed the scanner, which showed that there was a connection between the computer and the printer but nothing more than that. The bottom line is that I cannot choose the printer when I try to print and that it is not shown as one of my printers.
The error message I get is 1797 which states: "Failed to create print object Dell V510 Series (Network) -- tons of question marks".
I also tried to install the printer and device manually, which in both cases the message that I'm getting is that the device manager cannot be found.
Can you copy a document under the glass? Black and white and color?
Does the printer have a WiFi light? If yes, does the printer show it's connected, when wireless? Make and model of your wireless router and the type of security you're using? What channel?
Can you run Finding System Information REMOVE YOUR PRODUCT ID and REGISTERED OWNER and post the information back here.
Can you also provide the virus program and firewall you're using?
Hi Rick, thank you for trying to help me, and pardon for my late reply.
I am able to copy under the glass. The printer does have a light, which turned green (from orange) after I went through with the installation, which means it is connected. I went into the network definitions within the printer as well and it shows it is connected to the right network. The router is Verizon's ML424WR (how do I find the security and channel?). Anti-virus is Microsoft Security Essentials (how do I find the Firewall info?).
I found out something about the router that's might causing the problem... it turns out that this router does not support WPA, which this printer requires. I found that out after I tried to install a wireless repeater and noticed that the repeater (which was also asking for a WPA connection in order to communicate with the router) did not connect with the router. I contacted Verizon and they've said that their routers and infrastructure do not currently support WPA. Maybe that's the thing?
This is the information you asked for (excuse me if I wasn't supposed to paste the entire thing minus the things you've mentioned):
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Izhar>systeminfo
Host Name: IZHAR-PC
OS Name: Microsoft Windows 7 Professional
OS Version: 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Organization:
Original Install Date: 3/19/2011, 12:03:14 PM
System Boot Time: 3/11/2013, 12:54:36 AM
System Manufacturer: Dell Inc.
System Model: Latitude E6400
System Type: X86-based PC
Processor(s): 1 Processor(s) Installed.
[01]: x64 Family 6 Model 23 Stepping 10 GenuineIntel
Verizon is saying that the WPS feature is not enabled at the moment, and that the WPS button on the router is there so that it could be operated when they will enable it (I swear, this is their official answer).
They're using WPA2 security(Personal) the adapter may or may not connect. It may need changed to WPA-PSK(TKIP) Security(personal)
Channels 1, 6 or 11 get the best communications with wireless devices. I use channel 11.
With the computer online, you can try installing the printer by inserting the printer disk, choose new installation, network and follow the instructions. See if it finds your network. It should ask for a password. Did the WiFi light turn green?
Rick, I'm starting to narrow it down and think that the problem is not with the router or the wireless connection. It seems like the printer has no problem connecting with the wireless network (the light is green, and the network is correct). What it fails to do is to create a the printer on the computer.
Based on the instructions, I connected the computer to the printer with the attached USB cable, and the computer tried to install the driver automatically. It says the following:
USB Composite Device - Ready - V
V310-V510 Series - Device Manager could not be found - X
USB Mass Storage Device - Ready - V
USB Printing Support - Ready - V
USB Input - Ready - V
Dell USB Mass Storage USB Device - Ready V
DellV310-V510 Series - Device Manager could not be found - X
(The latter is not a mistake, it does appear in this way twice)
Here are some weird things that I discovered:
1) When I right click My Computer -> Manage -> Device Manager -- I see two items with a yellow exclamation mark - Photosmart Premium C309g-m & V310-V510 Series. Double click on the latter -> Device Manager -> Update Device Manager -- I chose to find the driver manually and directed the search to D:\drivers (which is the installation CD's folder for drivers). It is now telling me that the device is functioning properly and it has a green question mark next to it. I still can't see it as one of my printers. I couldn't also find the device manager for the other one (perhaps it's the other printer in the house).
2) I read somewhere that Windows Update might have something to do with it so I checked to see what's up. The first screen that Windows Update shows me is a red X that says: Check if there are updates available for your computer. When I click the button below it, "check if updates are available", it prompts the following message: "Windows Update is unable to currently check if updates exist since the service is not working. You may have to restart your computer". Useless to say that restarting didn't do anything. Under "changing properties" my setting is the recommended "Install updates automatically", so my system is supposed to enable the updates.
3) I thought this might have to do with the firewall, so I checked - my settings show that Windows' firewall is on, but does allow for programs to come in. Meaning, the option chosen is: "Notify me when Windows Firewall blocks a new program". So it is not the firewall either.
4) When I go to "Devices and Printers" I can see the printer with a yellow exclamation mark.
I don't know if the Windows Update thing has to do with anything, but the printer is undoubtedly connected to the wireless network and not with the computer, and Windows Update is not working properly.
Checking to see if I can find out anything about this. Still think you need the matching items for the connection to work.
Radio type : 802.11g Authentication : WPA-Personal Cipher : TKIP Connection mode : Auto Connect Channel : 11
I do these tweaks on all my computers, even for the ethernet connection.
Start, control panel, device manager.
Go to the USB Controller section and click the + sign.
Go to each USB Root Hub and right click on it, left click properties, left click power management. Uncheck the box, allow computer to turn off this device to save power.
Restart your computer.
--------------------------------------
Start, control panel, device manager. Click on Network and then right click on your wireless adapter, left click properties, power management. Uncheck the box, allow computer to turn off this device to save power.
With the computer online, insert the printer disk and install the printer. Choose new installation, network and follow the instructions. It should ask for your network and password.
PudgyOne
11 Legend
•
30315 Posts
•
106638 Points
969
0
Posted March 11th, 2013 00:00
BG,
Can you copy a document under the glass? Black and white and color?
Does the printer have a WiFi light? If yes, does the printer show it's connected, when wireless? Make and model of your wireless router and the type of security you're using? What channel?
Can you run Finding System Information REMOVE YOUR PRODUCT ID and REGISTERED OWNER and post the information back here.
Can you also provide the virus program and firewall you're using?
Rick