Hello

We have made many changes to our download sites over the years. If you are using an old version of the iDRAC/LCC then it may not be able to locate the correct catalog file. I suggest updating the iDRAC/LCC by one of the other available methods and trying again.

The catalog file was moved from the root of ftp.dell.com to ftp.dell.com/catalog/, so you can try specifying that location instead of ftp.dell.com. Downloads.dell.com/catalog/ should work as well.

---

@jmitchell-apt wrote:

When performing a network test, the machine reaches its Gateway and DNS addresses just fine, but fails to reach the ftp.dell.com domain.

---

If it is failing to reach the site then you should troubleshoot your network. Some network security or firewall may be blocking access.

www.dell.com/support/home/product-support/product/idrac7-8-lifecycle-controller-v2.40.40.40/

Thanks

Hey Daniel,

I had to update a PowerEdge R540 last week, and it was able to connect to the FTP site without issue, although it was newer and still under warranty. I will figure out how to update the LCC, since it appears to be very much out of date.

Thanks!

I cannot reply again to this topic, my post keeps getting removed for some reason.

It appears my previous post didn't make it, so here's an update on what I've tried today.

LCC - 1.1.0.1108 (2013?)
BIOS: 1.3.7
iDRAC7: 1.30.30 (Build 43)

So things are pretty out of date.

Here's what I tried with your suggestions for FTP, and the results:

Address: downloads.dell.com
Catalog Location: catalog
Result: Asks for username and password

Address: downloads.dell.com/catalog
Result: LNK0002 Error - unable to resolve hostname

So none of the suggestions for FTP are working for me. It boggles my mind because as my last post stated, I used the ftp.dell.com site to update a PowerEdge R540 with no problems just last week. So I tried to update the LCC itself with a USB drive, and I still can't manage it!

I downloaded the iDRAC with Lifecycle Controller 2.52.52.52 firmware, and the Legacy Dell Lifecycle Controller LC2 1.4.2. The server recognizes the flash drive that I plug in, but it won't find either of those firmware items in the drive. I'm beyond lost on what I'm missing here.

I appreciate any further help.

It appears my previous post didn't make it, so here's an update on what I've tried today.

LCC - 1.1.0.1108 (2013?)
BIOS: 1.3.7
iDRAC7: 1.30.30 (Build 43)

So things are pretty out of date.

Here's what I tried with your suggestions for FTP, and the results:

Address: downloads.dell.com
Catalog Location: catalog
Result: Asks for username and password

Address: downloads.dell.com/catalog
Result: LNK0002 Error - unable to resolve hostname

So none of the suggestions for FTP are working for me. It boggles my mind because as my last post stated, I used the ftp.dell.com site to update a PowerEdge R540 with no problems just last week. So I tried to update the LCC itself with a USB drive, and I still can't manage it!

I downloaded the iDRAC with Lifecycle Controller 2.52.52.52 firmware, and the Legacy Dell Lifecycle Controller LC2 1.4.2. The server recognizes the flash drive that I plug in, but it won't find either of those firmware items in the drive. I'm beyond lost on what I'm missing here.

I appreciate any further help.

My post keeps getting deleted. This is getting annoying.

It appears my previous post didn't make it, so here's an update on what I've tried today.

LCC - 1.1.0.1108 (2013?)
BIOS: 1.3.7
iDRAC7: 1.30.30 (Build 43)

So things are pretty out of date.

Here's what I tried with your suggestions for FTP, and the results:

Address: downloads.dell.com
Catalog Location: catalog
Result: Asks for username and password

Address: downloads.dell.com/catalog
Result: LNK0002 Error - unable to resolve hostname

So none of the suggestions for FTP are working for me. It boggles my mind because as my last post stated, I used the ftp.dell.com site to update a PowerEdge R540 with no problems just last week. So I tried to update the LCC itself with a USB drive, and I still can't manage it!

I downloaded the iDRAC with Lifecycle Controller 2.52.52.52 firmware, and the Legacy Dell Lifecycle Controller LC2 1.4.2. The server recognizes the flash drive that I plug in, but it won't find either of those firmware items in the drive. I'm beyond lost on what I'm missing here.

I appreciate any further help.

It appears my previous post didn't make it, so here's an update on what I've tried today.

LCC - 1.1.0.1108 (2013?)
BIOS: 1.3.7
iDRAC7: 1.30.30 (Build 43)

So things are pretty out of date.

Here's what I tried with your suggestions for FTP, and the results:

Address: downloads.dell.com
Catalog Location: catalog
Result: Asks for username and password

Address: downloads.dell.com/catalog
Result: LNK0002 Error - unable to resolve hostname

So none of the suggestions for FTP are working for me. It boggles my mind because as my last post stated, I used the ftp.dell.com site to update a PowerEdge R540 with no problems just last week. So I tried to update the LCC itself with a USB drive, and I still can't manage it!

I downloaded the iDRAC with Lifecycle Controller 2.52.52.52 firmware, and the Legacy Dell Lifecycle Controller LC2 1.4.2. The server recognizes the flash drive that I plug in, but it won't find either of those firmware items in the drive. I'm beyond lost on what I'm missing here.

I appreciate any further help.

Hey Daniel,

The forum seems to like to remove my post for breaking some sort of abuse guidelines, although I'm not sure why. I'll get more information to you as soon as I can. It's frustratingly annoying.

If the update is not recognized it is likely either not the correct file type or the file system used on the USB drive is not compatible with the LCC. FAT32 is the most universal file system for compatibility, NTFS may also work. The LCC should be able to recognize a Windows 32-bit Dell Update Package. Don't install the stand-alone LCC update. The iDRAC and LCC are a single combined update starting with version 2.0 of the iDRAC/LCC update.

Hey Daniel,

Thanks for your patience with this. I downloaded the LCC and iDRAC7 update package, and extracted the contents of the DUP to a FAT32-flash drive. The server claims a SUP0530 error, citing Incorrect Repository Path Location. The files are just hanging out in root, there shouldn't be any other path to pick. What in the world am I missing here?

Thanks,
Jeff

EDIT: I powered up another PowerEdge R820 that we have, same software versioning as the other one. Same results on ftp.dell.com, downloads.dell.com, and LLC firmware through a FAT32 USB. Reset both machines to factory config, same results.

I just tested on a system and was able to perform the update without issue. I created an ISO with just the DUP file in the root directory. I renamed the DUP to idrac.exe for simplicity. I had to specify the file name of the DUP to prevent the LCC from searching for a catalog file.