UNSOLVED

RoyU

updated

3 months ago

R

RoyU

8 Posts

0

778

March 12th, 2020 10:00

Changing internal subnets

Just installed a new SAE server. After standing it up I noticed I couldnt reach it from the subnet my office is using. 

Long story short, the SAE server is pre-set with two sets of subnets that match actual production networks in my network, so SAE cant see everything in my network, and most importantly, I cant connect to it from my office. 

How do we change the internal subnets SAE is using? (172.17.0.0/16 for docker0 and 172.18.0.0 for br-b3667...)

  • SonnyM812

    2 Posts

    445

    0

    Posted September 23rd, 2020 10:00

    I found this article that pointed me in the right direction after I was able to figure out this was SUSE Linux:


    https://www.suse.com/support/kb/doc/?id=000018916

    What I did in my case was to set the option to 172.17.0.1/24, since I don't use subnet 172.17.0.x.