Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
UNSOLVED
G
GabrielSSan
23 Posts
0
3102
August 28th, 2012 04:00
Windows 7 64 bit
Hi,
Does anyone had any problem to use Smarts Console with Windows 7 64 bits?
I tried every thing:
- Ionix 7, 8 and 9 with and without patches;
- Install with compability modes;
- Run with compability modes;
- Different jre versions instead of the one shiped with the software;
- And obviously, opened a SR to EMC.
GabrielSSan
23 Posts
1356
0
Posted September 11th, 2012 05:00
Hello Joseph
Yes, I know.
That's one of the reasons why I tried various compatibility modes (XP, etc).
Even installed a Windows XP under a VMWare Server on my desktop for testing pruposes and the same problem happens.
The problem is: Smarts Console opens for a few seconds, I can browse the alarms, then the console hangs.
The same behaviour can be observed when logging to any domain (SAM or IP) or openning a topology browser instead of notification log.
GabrielSSan
23 Posts
1356
0
Posted September 12th, 2012 11:00
Hello,
I already tested the latest versions 8.1.3.4 and 9.0.0.4.
Baadsgaard
16 Posts
1356
0
Posted September 12th, 2012 14:00
Hello Gabriel,
I see that you've tested different operating systems and versions you mentioned in your last post. It appears that you may be dealing with a java heap size issue. Have you tried increasing your java heap size? If no, knowledge base article emc273741 shows you how to increase the Java heap size.
Regards,
Joseph
GabrielSSan
23 Posts
1356
0
Posted September 13th, 2012 14:00
Hello,
I didn't had tried to raise heapsize until you said.
But it didn't worked.
I also enabled the debug options for the console and no error was printed out on local logs and remote servers logs. ( sm_gui.exe -Dcom.smarts.log.level=TRACE -Dcom.smarts.java.log=javaLog.txt -Dcom.smarts.debugConnection=true)
Baadsgaard
16 Posts
1356
0
Posted September 21st, 2012 09:00
Hello Gabriel,
You previously mentioned that you opended opened an SR for your issue. Could you provide me with the SR number?
Regards,
Joseph
GabrielSSan
23 Posts
1358
0
Posted October 1st, 2012 06:00
Hello Joseph,
I could not find the SR at PowerLink.
I don't know if it is because the SR is too OLD or because my profile was changed.
HockeyWeasel
27 Posts
1358
0
Posted October 2nd, 2012 08:00
Hi Gabriel,
I've sent you a private message requesting for additional information. Please respond when you have a moment.
Regards,
TJ
Technical Support Engineer III,
VCP/EMCSA/EMCIE
blmerrifield-di
1 Message
169
0
Posted August 27th, 2013 15:00
Having same issues, installs on Windows 7 x64 are hit or miss. Trying to install Console version 9.1.0.0 and several machines are not working.
Baadsgaard
16 Posts
1357
0
Posted September 10th, 2012 15:00
Hello Gabriel,
Per knowledge base article emc288279, ITOI does not provide a 64-bit version of the SAM console on any platform. There is only a 32-bit version that can run on a 64-bit operating system.
Let me know if this answers your question.
Regards,
Joseph