Hoping someone could help in this problem while I wait for Dell help support to answer. Was advise by Dell Help Chat that my Hard Drive was bad. A contracted Dell service person installed a new Hard Drive that was pre-loaded by the factory. Soon there after I noticed that my computer was using only one processor.I have an Intel(R) Core(TM)2 6300 @1.86 HMz. Prior to the Hard Drive crash my computer was doing two units of work for SETI. Now it only does one unit of work.
Device Manager show two processors, Task manager shows only one processing. Any ideas?
Computer is an E520, Windows XP Media Center Edition, 1 GB RAM
No, I brought up a number of programs and still only one graph. But I don't have any real intensive programs. SETI uses 98 to 99 % and drops down just a little when I bring up some office programs. Before the hard drive crash and the installing of a new hard drive (by dell) I was working two units at a time.
omething doesn't seem right with your configuration. Another verifier for you:
Open Task Manager (right click on the task bar and click on Task Manager). Click on the Performance tab. Click on View (from the drop-down menu), then select CPU History, and make sure "One graph per CPU" is selected.
How many graphs do you see in CPU Usage History? If you only see one, then Windows is not using the second processor properly. If you see two, then the problem lies with BOINC on not Windows.
If you do see one, open the Windows Device Manager, and open the "Computer" tree. What does it show there? Does it read "ACPI Multiprocessor PC" or does it say something about Uniprocessor? If it shows Uniprocessor, then Windows was not installed properly and you are not using the multiprocessor Hardware Abstraction Layer (HAL).
This is what I got from the SETI forum...I only show one graph and under the computer tree it shows ACPI Multiprocessor PC.
Performance Option read like this:
Multiple Core Option
Off On (On is hight lighted)
Off = disable multiple CPU Core technology
On= Enable Multiple CPU Core technology
The factory default setting is on.
My last reply to the Dell people is this:
This is my second answer to this message.
I hope this can help you solve this problem if it is part of it.
While looking at my computer screen I saw under My Recent Documents :DMI BOIS
Not knowing what this was I opened this document and this is what it shown and I have very little knowledge of some of the computer stuff:
c:\i386 COMPDATA DMIBIOS.htm
The software for IBM DMI BIOS Instrumtation might not be compatible with this version of Microsoft Windows and will be disabled during the upgrade. You should uninstall this software for a complete solution.
For more information about this software, or to obtain a version that runs this version of Microsoft Windows, visit manufacture's web site.
For more information about system management solutions, visit manufacture's web site.
For a list of software supported by this version of Microsoft Windows, see Microfosoft Windows XP compatibility list at http://www..microsoft.com.
Is it possible that the wrong version of Windows was installed on the new Hard Drive that was send to me and installed by your contracted service rep?
mombodog
2 Intern
•
12735 Posts
889
0
Posted January 23rd, 2007 03:00