UNSOLVED
Disk operation errors in AIX
Can any one help me in fixing the disk operation errors in AIX hosts connected to VMAX, Support says everything is fine with HBA,cable, SFP and VMAX..But still we are facing this issue. Appreciate your help on this.
IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION
DCB47997 1117180615 T H hdisk5 DISK OPERATION ERROR
DCB47997 1117180615 T H hdisk5 DISK OPERATION ERROR
DCB47997 1117180615 T H hdisk5 DISK OPERATION ERROR
DCB47997 1117180615 T H hdisk5 DISK OPERATION ERROR
DCB47997 1117180515 T H hdisk5 DISK OPERATION ERROR
DCB47997 1117180515 T H hdisk5 DISK OPERATION ERROR
DCB47997 1117180415 T H hdisk5 DISK OPERATION ERROR
DCB47997 1117180415 T H hdisk5 DISK OPERATION ERROR
DCB47997 1117180415 T H hdisk5 DISK OPERATION ERROR
DCB47997 1117180415 T H hdisk5 DISK OPERATION ERROR
DCB47997 1117180415 T H hdisk5 DISK OPERATION ERROR
DCB47997 1117180415 T H hdisk5 DISK OPERATION ERROR
DCB47997 1117180315 T H hdisk5 DISK OPERATION ERROR
DCB47997 1117180315 T H hdisk5 DISK OPERATION ERROR
DCB47997 1117180215 T H hdisk5 DISK OPERATION ERROR
DCB47997 1117180215 T H hdisk5 DISK OPERATION ERROR
DCB47997 1117180215 T H hdisk5 DISK OPERATION ERROR
DCB47997 1117180115 T H hdisk5 DISK OPERATION ERROR
DCB47997 1117180015 T H hdisk0 DISK OPERATION ERROR
storage_eng
1 Message
4755
0
Posted November 25th, 2015 05:00
I see that the issue is with just one device .. hdisk5 .
Copy paste the first two Sense code lines from the errpt -a log so that we can find the issueKen.Whitehead
24 Posts
4755
0
Posted December 27th, 2015 12:00
Hello Koppuru,
If you are still experiencing these error messages please open a service request with the software teams.
If PP is installed open it with the PP for AIX team.
Please make sure you are using the correct reserve policy for the environment.
https://support.emc.com/docu5126_Host_Connectivity_Guide_for_IBM_AIX.pdf?language=en_US
PedalHarder
4 Apprentice
•
465 Posts
4755
0
Posted November 22nd, 2015 15:00
You need to get the verbose output of the errpt with the -a flag then decode the sense data to understand what the errors are about. There is a good how-to article here:
https://support.emc.com/kb/209240