Solved!
Go to SolutionS
Steve0_2012
1 Rookie
•
73 Posts
0
14718
April 29th, 2014 13:00
VMAX SMI-S
Does anyone know if I can install the EMC SMI-S provider on the Solutioner Enablers host without overwriting the exisiting SE version. In other words can we add SMI-S on top of the current SE install. Currently have SE installed but no SMI-S and want to add it.
Also any good instructions/links/pointers for configuring the SMI-S provider following a successful installation.
6087
0
Posted April 30th, 2014 06:00
Thank you for the response.
Is it safe to over-write the existing version of SE. This is a test environment also.
6087
0
Posted April 30th, 2014 07:00
Yes, you can do that only for testing purposes
Hope this helps
Mohammed Salem
6087
0
Posted May 14th, 2014 13:00
After upgrading SE to now include the SMI-S provider I am trying to addsys. However I am not sure what username/password I need to add. Is this some default account or can I create one in Unisphere for VMAX for the SMI-S provider,
6087
0
Posted May 14th, 2014 13:00
I tried that earlier but still get an unauthorized error message.
6087
0
Posted May 14th, 2014 13:00
Default is admin/#1Password
6086
1
Posted May 14th, 2014 14:00
Is SMI-S rejecting the user/password? Or might it be a symauth-related error? If you would, please provide the output or a screenshot.
3679
1
Posted May 15th, 2014 05:00
I think you are over-complicating things here. Present gatekeepers to the SE environment, do a symcfg discover and then SMI-S will see the arrays. From within the Testsmiprovider.exe, run a "dv" and you will see the arrays:
(localhost:5988) ? dv
++++ Display version information ++++
CIM ObjectManager Name: EMC:10.108.246.5
CIMOM Version: EMC CIM Server Version 2.7.3.3.0.8
SMI-S qualified version: 1.5.0
SMI-S Provider version: V4.6.2.1
SMI-S Provider Location: Proxy
SMI-S Provider Server:
Windows_NT DSIB2005 6.1.7600 x86_64 VM Guest OS (64bit Libraries)
Solutions Enabler version: V7.6-1808 2.3
Firmware version information:
(Local) Symmetrix Array 0001957009xx (VMAX40K) : 5876.280.174
(Local) Symmetrix Array 0001987000xx (VMAX10K) : 5876.268.174
(Local) Symmetrix Array 0001987000xx (VMAX10K) : 5876.268.174
(Local) Symmetrix Array 0001987000xx (VMAX10K) : 5876.268.174
(Local) Symmetrix Array 0001987001xx (VMAX10K) : 5876.229.145
Retrieve and Display data - 1 Iteration(s) In 3.634363 Seconds
Please press enter key to continue...
6086
0
Posted May 15th, 2014 05:00
When it asks for the Ip which Ip address is it - service processor?? I know for clariion it is the Storage Processor (PSA, SPB) but not sure for VMAX.
Also if I select to provide the array id is this the same as the Serial number from Unisphere for VMAX window.
Do I perhaps need to create some account from within EMC Unisphere for VMAX to connect to. From the SMI-S server I am using admin/#1Password
1017
0
Posted May 15th, 2014 06:00
Yes...dv has discovered the arrays. So I did not have to addsys afterall. Much appreciated.
M_Salem
213 Posts
6078
0
Posted April 29th, 2014 13:00
Unfortunately, You will have first to uninstall the current version of SE and then install SMI-S which contains SE libraries. This has been mentioned in SMI-S release notes
For testing SMI-S you can use testprovider.exe tool. It is hipped with SMI-S. For further instruction please check (EMC kb8309)
Hope this helps.
Mohammed Salem