UNSOLVED

ambitbio

updated

20 years ago

A

ambitbio

28 Posts

0

10633

April 27th, 2007 17:00

Adding space to an existing RAID5 array

I have a Poweredge 2950 with 6 drive bays.  Three of them have disks in them (300GB) and is configured as a RAID5 array.  I just bought 3 more disks (same make, model) that I want to put in the three remaining slots and simply increase the size of my existing array/share (homedrives).  Server Manager sees the new disk, but I see no option to add it to my exisitng array....Any help is much appreciated.


Message Edited by ambitbio on 04-27-2007 01:11 PM
  • ambitbio

    28 Posts

    810

    0

    Posted April 27th, 2007 17:00

    After reading some old threads, it seems like I can do what I want to do using the "Reconfigure" option in Server Manager.  And from what I understand, it can be done "live" and not affect my clients too bad.  This server has only one virtual disk, in a RAID5 array, containing both the "C:\" and "D:\" partiitions.  I simply want to add three more 300GB drives to that single virtual disk to increase the storage space on the "D:\" drive.
  • ambitbio

    28 Posts

    811

    0

    Posted May 1st, 2007 14:00

    So, besides seeing the new disk in Server Manager, will Windows see it when I run diskpart or do I have to do anything to "let" Windows see the added space before runnig diskpart?
  • ambitbio

    28 Posts

    811

    0

    Posted May 1st, 2007 14:00

    So after this is done (it's at 96%), I can just run the diskpart utility and then Windows will see the added space in the partition?  Also, The RAID5 is on a single Virtual Disk, which contains the C and D partitions (system and data, respectively).  Diskpart won't do anything to the system (C:\) partition, correct?
  • Mark_A_Smith

    2 Intern

    •

    827 Posts

    811

    0

    Posted May 1st, 2007 14:00

    Just look in diskmanager.  It should show up as unused space at the end of the drive.
  • Mark_A_Smith

    2 Intern

    •

    827 Posts

    811

    0

    Posted May 1st, 2007 14:00

    You are correct.  Diskpart works at the partition level and only affects the partition that you choose.
     
  • Mark_A_Smith

    2 Intern

    •

    827 Posts

    811

    0

    Posted May 1st, 2007 14:00

    No worries - diskpart is instant.  All is does is move the pointer for the partition.
  • Mark_A_Smith

    2 Intern

    •

    827 Posts

    811

    0

    Posted May 1st, 2007 14:00

    Use the reconfigure option to add the three drives to the existing array.  After this has finished then use a utility to extend the d: partition (diskpart if you are using W2K3).
  • ambitbio

    28 Posts

    811

    0

    Posted May 1st, 2007 14:00

    That worked fine, but COMPLETELY slowed the network down, or at leastanyone who uses the file server...LOL.  Luckily I just put in a single drive, so it only took 14 hours!!!  GEEEZ.....Now I'm terrified to do the diskpart portion of it....
  • ambitbio

    28 Posts

    811

    0

    Posted May 1st, 2007 17:00

    As of right now, the disk shows as a furth disk in the Dell Server Manager Virtual Disk properties, however in Windows Disk Managment, it does not show up anywhere.  I still see my single logical disk, with 2 partitions, C and D, and nothing afterwards or "unused". 
  • Mark_A_Smith

    2 Intern

    •

    827 Posts

    230

    0

    Posted May 1st, 2007 17:00

    Sometimes a reboot is necessary to make the OS happy.  You can also try a "Refresh" in Disk Manager.