I have Dell VRTX Server, I want to Log in to it's CMC controller (on HP is ILO), how to do this and which software Ihave to download in order to be able to Manage the server ?
You do not need to download any software. Our version of out-of-band management that you will use for your VRTX is the CMC and iDRAC. You will use the CMC to manage the chassis and the iDRAC to manage the individual servers.
Our out-of-band management uses embedded web servers and will run in most browsers. A full list of compatible browsers should be in the user's guide for the latest firmware. The CMC has a user's guide that goes into detail about initial setup and configuration. Here is the manual page for the VRTX:
Daniel My
12 Elder
•
6205 Posts
1578
0
Posted February 11th, 2015 16:00
Hello
You do not need to download any software. Our version of out-of-band management that you will use for your VRTX is the CMC and iDRAC. You will use the CMC to manage the chassis and the iDRAC to manage the individual servers.
Our out-of-band management uses embedded web servers and will run in most browsers. A full list of compatible browsers should be in the user's guide for the latest firmware. The CMC has a user's guide that goes into detail about initial setup and configuration. Here is the manual page for the VRTX:
http://www.dell.com/support/home/us/en/04/product-support/product/poweredge-vrtx/manuals
Here is the manual for the VRTX CMC that is on that page:
http://www.dell.com/support/Manuals/us/en/04/Topic/poweredge-vrtx/CMCVRTX_UG_2.0-v1/en-us/GUID-2779D670-33D5-4F55-9831-54B44A1D9F65
Thanks