Attached a script which can do this:

1. config_drac.sh this script configures the username, password, active directory and all components of the drac
2. ipaddr.txt: This text file contains a list of ip address which need to be configured
3. drac.cfg: This file contains the configurations needed to be set/unset on the DRAC.

To use the script the user has to do the following.

1. Copy these files into one directory (say /home/scripts)
2. Make the necessary changes in the drac.cfg file. This includes the configuration the user needs to automate.
3. Add all the ip addresses of the DRACs which needs to be configured using the drac.cfg file in ipaddr.txt file.
4. Run the script config_drac.sh
5. This scripts uses the information from the above mentioned files and attempts to configure the DRAC.
6. All the logs are stored in config.log file under the same folder as these files.

I have added sample files for both drac.cfg and ipaddr.txt with some description in them for easy usage.

Hope this helps:

Seems the attachments were not getting uploaded, please let me know any alternate method to upload these sample scripts

doh .. email is scott_hanson@dell.com

send to me in email and I'll see if I can attach, or I'll post on a separate page. Thanks !!

Thanks for sending the scripts. I created a page for them with your instructions, and made you a writer so you can edit the page if needed.

http://www.delltechcenter.com/page/Multiple+DRAC+Password+Changes

Thanks again !

Hi Guys,

Is there a way to covert the .sh to vbs? (please say yes)

Thanks,
Stuart.