UNSOLVED
racadm command - remote image
I am using the below which works on 1.46.46 but not 1.57.57 or 1.66.65.
racadm -r $DRAC -u $Username -p $Password remoteimage -c -u $UserID -p $userPass -l //servername/share/isoname.iso
When I check it with remoteimage -s it is connected in 1.46.46 but not 1.57.57 or .1.66.65. Any suggesstions?
Thank you!
DELL-Shine K
6 Operator
•
3042 Posts
2093
0
Posted June 21st, 2015 22:00
Can you login to iDRAC with SSH and try to connect remote image by running below command
racadm remoteimage -c -u -p -l //servername/share/isoname.iso
Note : Make sure you are mentioning share path in quotes if there are spaces in the file path
Also let me know racadm version and operating system installed on the client from where racadm command is executed
Daniel My
12 Elder
•
6205 Posts
2093
0
Posted June 19th, 2015 17:00
Hello
When a firmware update changes racadm command structure a new racadm manual is released. A new manual was released with the 1.50.50 update. I would suggest using that manual as a reference for racadm.
http://www.dell.com/support/home/us/en/04/product-support/product/integrated-dell-remote-access-cntrllr-7-v1.50.50/manuals
What is the output of status(remoteimage -s) on the 1.50.50 and higher iDRACs? Try putting the share location in quotes. Also, check the iDRAC log for a hint as to what is occurring.
Thanks